SDMMC internal peripheral

This message will disappear after all relevant tasks have been resolved.

Semantic MediaWiki

There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

Template:ArticleMainWriter Template:ArticleApprovedVersion

1 Article purpose[edit source]

The purpose of this article is to

briefly introduce the SDMMC peripheral and its main features
indicate the level of security supported by this hardware block
explain how each instance can be allocated to the three runtime contexts and linked to the corresponding software components
explain, when needed, how to configure the SDMMC peripheral.

2 Peripheral overview[edit source]

The SDMMC peripheral is used to interconnect STM32 MPU to SD memory cards, SDIO and MMC devices.

2.1 Features[edit source]

Refer to STM32MP15 reference manuals for the complete list of features, and to the software components, introduced below, to know which features are really implemented.

2.2 Security support[edit source]

SDMMC1/2/3 instances are either non-secure or secure peripherals (under ETZPC control).

Warning

When an SDMMC instance is secure internal, the DMA cannot be used to perform data transfers.
STMicroelectronics does not provide secure MMC driver (see below chapter)

3 Peripheral usage and associated software[edit source]

3.1 Boot time[edit source]

SDMMC1/2 instances can be used to support memory boot on SD or MMC Flash devices.

The SDMMC3 is not used at boot time.

3.2 Runtime[edit source]

3.2.1 Overview[edit source]

SDMMC1/2/3 instances can be allocated to:

the Arm^® Cortex^®-A7 non-secure core to be used under Linux^® with the MMC framework
the Arm^® Cortex^®-M4 to be used with STM32Cube MPU Package with STM32Cube SDMMC driver

Chapter #Peripheral assignment describes which peripheral instance can be assigned to which context.

3.2.2 Software frameworks[edit source]

Domain	Peripheral	Software frameworks			Comment
		Cortex-A7 S (OP-TEE)	Cortex-A7 NS (Linux)	Cortex-M4 (STM32Cube)
Mass storage	SDMMC		Linux MMC framework	STM32Cube SDMMC driver

3.2.3 Peripheral configuration[edit source]

The configuration is applied by the firmware running in the context to which the peripheral is assigned. The configuration by itself can be performed via the STM32CubeMX tool for all internal peripherals. It can then be manually completed (especially for external peripherals) according to the information given in the corresponding software framework article.

For Linux^® kernel configuration, please refer to SDMMC device tree configuration.

3.2.4 Peripheral assignment[edit source]

Internal peripherals

Check boxes illustrate the possible peripheral allocations supported by STM32 MPU Embedded Software:

☐ means that the peripheral can be assigned (☑) to the given runtime context.

✓ is used for system peripherals that cannot be unchecked because they are statically connected in the device.

Refer to How to assign an internal peripheral to a runtime context for more information on how to assign peripherals manually or via STM32CubeMX.
The present chapter describes STMicroelectronics recommendations or choice of implementation. Additional possiblities might be described in STM32MP15 reference manuals.

Domain	Peripheral	Runtime allocation				Comment
Domain	Peripheral	Instance	Cortex-A7 S (OP-TEE)	Cortex-A7 NS (Linux)	Cortex-M4 (STM32Cube)	Comment
Mass storage	SDMMC	SDMMC1		☐
		SDMMC2		☐
		SDMMC3		☐	☐	Assignment (single choice)

4 How to go further[edit source]

Chapter not applicable right now, maybe completed later.

5 References[edit source]

Chapter not applicable right now, maybe completed later.