Camera sensors hardware components

Applicable for

STM32MP13x lines, STM32MP15x lines, STM32MP25x lines

1. Article purpose[edit source]

The purpose of this article is to:

List the camera sensors hardware components that might be integrated in the different boards.
Link these components to the corresponding software framework(s).
Point to the appropriate component datasheets.
Explain, when necessary, how to configure these components.

2. Software frameworks[edit source]

Domain

Peripheral

Software components

Comment

OP-TEE

Linux

STM32Cube

Visual

OmniVision OV5640

GalaxyCore GC2145

Sony IMX335

V4L2 camera framework

Camera sensors

3. OmniVision OV5640[edit source]

The OmniVision OV5640 camera sensor supports both parallel and MIPI^® CSI-2 interfaces.

For details and the datasheet please contact the OV5640 provider.

3.1. Linux driver[edit source]

Bindings: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml

Sources: drivers/media/i2c/ov5640.c

4. GalaxyCore GC2145[edit source]

The GalaxyCore GC2145 camera sensor supports both parallel and MIPI^® CSI-2 interfaces.

For details and the datasheet please contact GalaxyCore.

Information

This camera sensor can be found on some STM32MP13 Discovery kits and on the MB1897 camera board.

4.1. Linux driver[edit source]

Bindings: Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml

Sources: drivers/media/i2c/gc2145.c

5. Sony IMX335[edit source]

The Sony IMX335 camera sensor is a 5 Mega Pixels Raw Bayer sensor with MIPI^® CSI-2 interface. Depending on number of CSI-2 lanes used, it can output RAW10 or RAW12.

For details and the datasheet please contact the IMX335 provider.

Information

This camera sensor can be found on MB1854 camera daughterboard.

5.1. Linux driver[edit source]

Bindings: Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml

Sources: drivers/media/i2c/imx335.c