1. Overview[edit | edit source]
v4l2-ctl is a V4L2 utility allowing to control the camera subsystem [1]. It is based on V4L2 Linux kernel interface[2].
2. Usage[edit | edit source]
v4l2-ctl --help
General/Common options:
--all display all information available
-C, --get-ctrl=<ctrl>[,<ctrl>...]
get the value of the controls [VIDIOC_G_EXT_CTRLS]
-c, --set-ctrl=<ctrl>=<val>[,<ctrl>=<val>...]
set the value of the controls [VIDIOC_S_EXT_CTRLS]
-D, --info show driver info [VIDIOC_QUERYCAP]
-d, --device=<dev> use device <dev> instead of /dev/video0
if <dev> starts with a digit, then /dev/video<dev> is used
-e, --out-device=<dev> use device <dev> for output streams instead of the
default device as set with --device
if <dev> starts with a digit, then /dev/video<dev> is used
-h, --help display this help message
--help-all all options
--help-io input/output options
--help-misc miscellaneous options
--help-overlay overlay format options
--help-sdr SDR format options
--help-selection crop/selection options
--help-stds standards and other video timings options
--help-streaming streaming options
--help-tuner tuner/modulator options
--help-vbi VBI format options
--help-vidcap video capture format options
--help-vidout vidout output format options
--help-edid edid handling options
-k, --concise be more concise if possible.
-l, --list-ctrls display all controls and their values [VIDIOC_QUERYCTRL]
-L, --list-ctrls-menus
display all controls and their menus [VIDIOC_QUERYMENU]
-r, --subset=<ctrl>[,<offset>,<size>]+
the subset of the N-dimensional array to get/set for control <ctrl>,
for every dimension an (<offset>, <size>) tuple is given.
-w, --wrapper use the libv4l2 wrapper library.
--list-devices list all v4l devices
--log-status log the board status in the kernel log [VIDIOC_LOG_STATUS]
--get-priority query the current access priority [VIDIOC_G_PRIORITY]
--set-priority=<prio>
set the new access priority [VIDIOC_S_PRIORITY]
<prio> is 1 (background), 2 (interactive) or 3 (record)
--silent only set the result code, do not print any messages
--sleep=<secs> sleep <secs>, call QUERYCAP and close the file handle
--verbose turn on verbose ioctl status reporting
A longer help is also available:
v4l2-ctl --help-all
General/Common options:
--all display all information available
-C, --get-ctrl=<ctrl>[,<ctrl>...]
get the value of the controls [VIDIOC_G_EXT_CTRLS]
-c, --set-ctrl=<ctrl>=<val>[,<ctrl>=<val>...]
set the value of the controls [VIDIOC_S_EXT_CTRLS]
-D, --info show driver info [VIDIOC_QUERYCAP]
-d, --device=<dev> use device <dev> instead of /dev/video0
if <dev> starts with a digit, then /dev/video<dev> is used
-e, --out-device=<dev> use device <dev> for output streams instead of the
default device as set with --device
if <dev> starts with a digit, then /dev/video<dev> is used
-h, --help display this help message
--help-all all options
--help-io input/output options
--help-misc miscellaneous options
--help-overlay overlay format options
--help-sdr SDR format options
--help-selection crop/selection options
--help-stds standards and other video timings options
--help-streaming streaming options
--help-tuner tuner/modulator options
--help-vbi VBI format options
--help-vidcap video capture format options
--help-vidout vidout output format options
--help-edid edid handling options
-k, --concise be more concise if possible.
-l, --list-ctrls display all controls and their values [VIDIOC_QUERYCTRL]
-L, --list-ctrls-menus
display all controls and their menus [VIDIOC_QUERYMENU]
-r, --subset=<ctrl>[,<offset>,<size>]+
the subset of the N-dimensional array to get/set for control <ctrl>,
for every dimension an (<offset>, <size>) tuple is given.
-w, --wrapper use the libv4l2 wrapper library.
--list-devices list all v4l devices
--log-status log the board status in the kernel log [VIDIOC_LOG_STATUS]
--get-priority query the current access priority [VIDIOC_G_PRIORITY]
--set-priority=<prio>
set the new access priority [VIDIOC_S_PRIORITY]
<prio> is 1 (background), 2 (interactive) or 3 (record)
--silent only set the result code, do not print any messages
--sleep=<secs> sleep <secs>, call QUERYCAP and close the file handle
--verbose turn on verbose ioctl status reporting
Tuner/Modulator options:
-F, --get-freq query the frequency [VIDIOC_G_FREQUENCY]
-f, --set-freq=<freq>
set the frequency to <freq> MHz [VIDIOC_S_FREQUENCY]
-T, --get-tuner query the tuner settings [VIDIOC_G_TUNER]
-t, --set-tuner=<mode>
set the audio mode of the tuner [VIDIOC_S_TUNER]
Possible values: mono, stereo, lang2, lang1, bilingual
--tuner-index=<idx> Use idx as tuner idx for tuner/modulator commands
--list-freq-bands display all frequency bands for the tuner/modulator
[VIDIOC_ENUM_FREQ_BANDS]
--get-modulator query the modulator settings [VIDIOC_G_MODULATOR]
--set-modulator=<txsubchans>
set the sub-carrier modulation [VIDIOC_S_MODULATOR]
<txsubchans> is one of:
mono: Modulate as mono
mono-rds: Modulate as mono with RDS (radio only)
stereo: Modulate as stereo
stereo-rds: Modulate as stereo with RDS (radio only)
bilingual: Modulate as bilingual
mono-sap: Modulate as mono with Second Audio Program
stereo-sap: Modulate as stereo with Second Audio Program
--freq-seek=dir=<0/1>,wrap=<0/1>,spacing=<hz>,low=<freq>,high=<freq>
perform a hardware frequency seek [VIDIOC_S_HW_FREQ_SEEK]
dir is 0 (seek downward) or 1 (seek upward)
wrap is 0 (do not wrap around) or 1 (wrap around)
spacing sets the seek resolution (use 0 for default)
low and high set the low and high seek frequency range in MHz
Input/Output options:
-I, --get-input query the video input [VIDIOC_G_INPUT]
-i, --set-input=<num>
set the video input to <num> [VIDIOC_S_INPUT]
-N, --list-outputs display video outputs [VIDIOC_ENUMOUTPUT]
-n, --list-inputs display video inputs [VIDIOC_ENUMINPUT]
-O, --get-output query the video output [VIDIOC_G_OUTPUT]
-o, --set-output=<num>
set the video output to <num> [VIDIOC_S_OUTPUT]
--set-audio-output=<num>
set the audio output to <num> [VIDIOC_S_AUDOUT]
--get-audio-input query the audio input [VIDIOC_G_AUDIO]
--set-audio-input=<num>
set the audio input to <num> [VIDIOC_S_AUDIO]
--get-audio-output query the audio output [VIDIOC_G_AUDOUT]
--set-audio-output=<num>
set the audio output to <num> [VIDIOC_S_AUDOUT]
--list-audio-outputs
display audio outputs [VIDIOC_ENUMAUDOUT]
--list-audio-inputs
display audio inputs [VIDIOC_ENUMAUDIO]
Standards/Timings options:
--list-standards display supported video standards [VIDIOC_ENUMSTD]
-S, --get-standard
query the video standard [VIDIOC_G_STD]
-s, --set-standard=<num>
set the video standard to <num> [VIDIOC_S_STD]
<num> a numerical v4l2_std value, or one of:
pal or pal-X (X = B/G/H/N/Nc/I/D/K/M/60) (V4L2_STD_PAL)
ntsc or ntsc-X (X = M/J/K) (V4L2_STD_NTSC)
secam or secam-X (X = B/G/H/D/K/L/Lc) (V4L2_STD_SECAM)
--get-detected-standard
display detected input video standard [VIDIOC_QUERYSTD]
--list-dv-timings list supp. standard dv timings [VIDIOC_ENUM_DV_TIMINGS]
--set-dv-bt-timings
query: use the output of VIDIOC_QUERY_DV_TIMINGS
index=<index>: use the index as provided by --list-dv-timings
or specify timings using cvt/gtf options as follows:
cvt/gtf,width=<width>,height=<height>,fps=<frames per sec>
interlaced=<0/1>,reduced-blanking=<0/1/2>,reduced-fps=<0/1>
The value of reduced-blanking, if greater than 0, indicates
that reduced blanking is to be used and the value indicate the
version. For gtf, there is no version 2 for reduced blanking, and
the value 1 or 2 will give same results.
reduced-fps = 1, slows down pixel clock by factor of 1000 / 1001, allowing
to support NTSC frame rates like 29.97 or 59.94.
Reduced fps flag takes effect only with reduced blanking version 2 and,
when refresh rate is an integer multiple of 6, say, fps = 24,30,60 etc.
or update all or part of the current timings fields:
width=<width>,height=<height>,interlaced=<0/1>,
polarities=<polarities mask>,pixelclock=<pixelclock Hz>,
hfp=<horizontal front porch>,hs=<horizontal sync>,
hbp=<horizontal back porch>,vfp=<vertical front porch>,
vs=<vertical sync>,vbp=<vertical back porch>,
il_vfp=<vertical front porch for bottom field>,
il_vs=<vertical sync for bottom field>,
il_vbp=<vertical back porch for bottom field>.
clear: start with zeroed timings instead of the current timings.
set the digital video timings according to the BT 656/1120
standard [VIDIOC_S_DV_TIMINGS]
--get-dv-timings get the digital video timings in use [VIDIOC_G_DV_TIMINGS]
--query-dv-timings query the detected dv timings [VIDIOC_QUERY_DV_TIMINGS]
--get-dv-timings-cap
get the dv timings capabilities [VIDIOC_DV_TIMINGS_CAP]
Video Capture Formats options:
--list-formats display supported video formats [VIDIOC_ENUM_FMT]
--list-formats-ext display supported video formats including frame sizes
and intervals
--list-framesizes=<f>
list supported framesizes for pixelformat <f>
[VIDIOC_ENUM_FRAMESIZES]
pixelformat is the fourcc value as a string
--list-frameintervals=width=<w>,height=<h>,pixelformat=<f>
list supported frame intervals for pixelformat <f> and
the given width and height [VIDIOC_ENUM_FRAMEINTERVALS]
pixelformat is the fourcc value as a string
--list-fields list supported fields for the current format
-V, --get-fmt-video
query the video capture format [VIDIOC_G_FMT]
-v, --set-fmt-video
--try-fmt-video=width=<w>,height=<h>,pixelformat=<pf>,field=<f>,colorspace=<c>,
xfer=<xf>,ycbcr=<y>,quantization=<q>,premul-alpha,bytesperline=<bpl>
set/try the video capture format [VIDIOC_S/TRY_FMT]
pixelformat is either the format index as reported by
--list-formats, or the fourcc value as a string.
The bytesperline option can be used multiple times, once for each plane.
premul-alpha sets V4L2_PIX_FMT_FLAG_PREMUL_ALPHA.
<f> can be one of the following field layouts:
any, none, top, bottom, interlaced, seq_tb, seq_bt,
alternate, interlaced_tb, interlaced_bt
<c> can be one of the following colorspaces:
smpte170m, smpte240m, rec709, 470m, 470bg, jpeg, srgb,
adobergb, bt2020, dcip3
<xf> can be one of the following transfer functions:
default, 709, srgb, adobergb, smpte240m, smpte2084, dcip3, none
<y> can be one of the following Y'CbCr encodings:
default, 601, 709, xv601, xv709, bt2020, bt2020c, smpte240m
<q> can be one of the following quantization methods:
default, full-range, lim-range
Video Output Formats options:
--list-formats-out display supported video output formats [VIDIOC_ENUM_FMT]
--list-fields-out list supported fields for the current output format
--get-fmt-video-out
query the video output format [VIDIOC_G_FMT]
--set-fmt-video-out
--try-fmt-video-out=width=<w>,height=<h>,pixelformat=<pf>,field=<f>,colorspace=<c>,
xfer=<xf>,ycbcr=<y>,quantization=<q>,premul-alpha,bytesperline=<bpl>
set/try the video output format [VIDIOC_S/TRY_FMT]
pixelformat is either the format index as reported by
--list-formats-out, or the fourcc value as a string.
premul-alpha sets V4L2_PIX_FMT_FLAG_PREMUL_ALPHA.
The bytesperline option can be used multiple times, once for each plane.
<f> can be one of the following field layouts:
any, none, top, bottom, interlaced, seq_tb, seq_bt,
alternate, interlaced_tb, interlaced_bt
<c> can be one of the following colorspaces:
smpte170m, smpte240m, rec709, 470m, 470bg, jpeg, srgb,
adobergb, bt2020, dcip3
<xf> can be one of the following transfer functions:
default, 709, srgb, adobergb, smpte240m, smpte2084, dcip3, none
<y> can be one of the following Y'CbCr encodings:
default, 601, 709, xv601, xv709, bt2020, bt2020c, smpte240m
<q> can be one of the following quantization methods:
default, full-range, lim-range
Video Overlay options:
--list-formats-overlay
display supported overlay formats [VIDIOC_ENUM_FMT]
--find-fb find the fb device corresponding with the overlay
--overlay=<on> turn overlay on (1) or off (0) (VIDIOC_OVERLAY)
--get-fmt-overlay query the video or video output overlay format [VIDIOC_G_FMT]
--set-fmt-overlay
--try-fmt-overlay=chromakey=<key>,global_alpha=<alpha>,
top=<t>,left=<l>,width=<w>,height=<h>,field=<f>
set/try the video or video output overlay format [VIDIOC_TRY/S_FMT]
<f> can be one of:
any, none, top, bottom, interlaced, seq_tb, seq_bt,
alternate, interlaced_tb, interlaced_bt
If the width or height changed then the old clip list and bitmap will
be invalidated.
--clear-clips clear any old clips, to be used in combination with --try/set-fmt-overlay
--clear-bitmap clear any old bitmap, to be used in combination with --try/set-fmt-overlay
--add-clip=top=<t>,left=<l>,width=<w>,height=<h>
Add an entry to the clip list. May be used multiple times.
This clip list will be passed to --try/set-fmt-overlay
--add-bitmap=top=<t>,left=<l>,width=<w>,height=<h>
Set the bits in the given rectangle in the bitmap to 1. May be
used multiple times.
The bitmap will be passed to --try/set-fmt-overlay
--get-fbuf query the overlay framebuffer data [VIDIOC_G_FBUF]
--set-fbuf=chromakey=<b>,src_chromakey=<b>,global_alpha=<b>,local_alpha=<b>,local_inv_alpha=<b>,fb=<fb>
set the overlay framebuffer [VIDIOC_S_FBUF]
<b> is 0 or 1
<fb> is the framebuffer device (/dev/fbX)
if <fb> starts with a digit, then /dev/fb<fb> is used
VBI Formats options:
--get-sliced-vbi-cap
query the sliced VBI capture capabilities
[VIDIOC_G_SLICED_VBI_CAP]
--get-sliced-vbi-out-cap
query the sliced VBI output capabilities
[VIDIOC_G_SLICED_VBI_CAP]
-B, --get-fmt-sliced-vbi
query the sliced VBI capture format [VIDIOC_G_FMT]
--get-fmt-sliced-vbi-out
query the sliced VBI output format [VIDIOC_G_FMT]
-b, --set-fmt-sliced-vbi
--try-fmt-sliced-vbi
--set-fmt-sliced-vbi-out
--try-fmt-sliced-vbi-out=<mode>
set/try the sliced VBI capture/output format to <mode>
[VIDIOC_S/TRY_FMT], <mode> is a comma separated list of:
off: turn off sliced VBI (cannot be combined with
other modes)
teletext: teletext (PAL/SECAM)
cc: closed caption (NTSC)
wss: widescreen signal (PAL/SECAM)
vps: VPS (PAL/SECAM)
--get-fmt-vbi query the VBI capture format [VIDIOC_G_FMT]
--get-fmt-vbi-out query the VBI output format [VIDIOC_G_FMT]
--set-fmt-vbi
--try-fmt-vbi
--set-fmt-vbi-out
--try-fmt-vbi-out=samplingrate=<r>,offset=<o>,samplesperline=<spl>,
start0=<s0>,count0=<c0>,start1=<s1>,count1=<c1>
set/try the raw VBI capture/output format [VIDIOC_S/TRY_FMT]
samplingrate: samples per second
offset: horizontal offset in samples
samplesperline: samples per line
start0: start line number of the first field
count0: number of lines in the first field
start1: start line number of the second field
count1: number of lines in the second field
SDR Formats options:
--list-formats-sdr display supported SDR capture formats [VIDIOC_ENUM_FMT]
--get-fmt-sdr query the SDR capture format [VIDIOC_G_FMT]
--set-fmt-sdr=<f> set the SDR capture format [VIDIOC_S_FMT]
parameter is either the format index as reported by
--list-formats-sdr-cap, or the fourcc value as a string
--try-fmt-sdr=<f> try the SDR capture format [VIDIOC_TRY_FMT]
parameter is either the format index as reported by
--list-formats-sdr-cap, or the fourcc value as a string
--list-formats-sdr-out
display supported SDR output formats [VIDIOC_ENUM_FMT]
--get-fmt-sdr-out query the SDR output format [VIDIOC_G_FMT]
--set-fmt-sdr-out=<f>
set the SDR output format [VIDIOC_S_FMT]
parameter is either the format index as reported by
--list-formats-sdr-out, or the fourcc value as a string
--try-fmt-sdr-out=<f>
try the SDR output format [VIDIOC_TRY_FMT]
parameter is either the format index as reported by
--list-formats-sdr-out, or the fourcc value as a string
Selection/Cropping options:
--get-cropcap query the crop capabilities [VIDIOC_CROPCAP]
--get-crop query the video capture crop window [VIDIOC_G_CROP]
--set-crop=top=<x>,left=<y>,width=<w>,height=<h>
set the video capture crop window [VIDIOC_S_CROP]
--get-cropcap-output
query crop capabilities for video output [VIDIOC_CROPCAP]
--get-crop-output query the video output crop window [VIDIOC_G_CROP]
--set-crop-output=top=<x>,left=<y>,width=<w>,height=<h>
set the video output crop window [VIDIOC_S_CROP]
--get-cropcap-overlay
query crop capabilities for video overlay [VIDIOC_CROPCAP]
--get-crop-overlay query the video overlay crop window [VIDIOC_G_CROP]
--set-crop-overlay=top=<x>,left=<y>,width=<w>,height=<h>
set the video overlay crop window [VIDIOC_S_CROP]
--get-cropcap-output-overlay
query the crop capabilities for video output overlays
[VIDIOC_CROPCAP]
--get-crop-output-overlay
query the video output overlay crop window [VIDIOC_G_CROP]
--set-crop-output-overlay=top=<x>,left=<y>,width=<w>,height=<h>
set the video output overlay crop window [VIDIOC_S_CROP]
--get-selection=target=<target>
query the video capture selection rectangle [VIDIOC_G_SELECTION]
See --set-selection command for the valid <target> values.
--set-selection=target=<target>,flags=<flags>,top=<x>,left=<y>,width=<w>,height=<h>
set the video capture selection rectangle [VIDIOC_S_SELECTION]
target=crop|crop_bounds|crop_default|compose|compose_bounds|
compose_default|compose_padded|native_size
flags=le|ge
--get-selection-output=target=<target>
query the video output selection rectangle [VIDIOC_G_SELECTION]
See --set-selection command for the valid <target> values.
--set-selection-output=target=<target>,flags=<flags>,top=<x>,left=<y>,width=<w>,height=<h>
set the video output selection rectangle [VIDIOC_S_SELECTION]
See --set-selection command for the arguments.
Miscellaneous options:
--wait-for-event=<event>
wait for an event [VIDIOC_DQEVENT]
<event> is the event number or one of:
eos, vsync, ctrl=<id>, frame_sync, source_change=<pad>,
motion_det
where <id> is the name of the control
and where <pad> is the index of the pad or input
--poll-for-event=<event>
poll for an event [VIDIOC_DQEVENT]
see --wait-for-event for possible events
-P, --get-parm display video parameters [VIDIOC_G_PARM]
-p, --set-parm=<fps>
set video framerate in <fps> [VIDIOC_S_PARM]
--get-output-parm display output video parameters [VIDIOC_G_PARM]
--set-output-parm=<fps>
set output video framerate in <fps> [VIDIOC_S_PARM]
--get-jpeg-comp query the JPEG compression [VIDIOC_G_JPEGCOMP]
--set-jpeg-comp=quality=<q>,markers=<markers>,comment=<c>,app<n>=<a>
set the JPEG compression [VIDIOC_S_JPEGCOMP]
<n> is the app segment: 0-9/a-f, <a> is the actual string.
<markers> is a colon separated list of:
dht: Define Huffman Tables
dqt: Define Quantization Tables
dri: Define Restart Interval
--encoder-cmd=cmd=<cmd>,flags=<flags>
Send a command to the encoder [VIDIOC_ENCODER_CMD]
cmd=start|stop|pause|resume
flags=stop_at_gop_end
--try-encoder-cmd=cmd=<cmd>,flags=<flags>
Try an encoder command [VIDIOC_TRY_ENCODER_CMD]
See --encoder-cmd for the arguments.
--decoder-cmd=cmd=<cmd>,flags=<flags>,stop_pts=<pts>,start_speed=<speed>,
start_format=<none|gop>
Send a command to the decoder [VIDIOC_DECODER_CMD]
cmd=start|stop|pause|resume
flags=start_mute_audio|pause_to_black|stop_to_black|
stop_immediately
--try-decoder-cmd=cmd=<cmd>,flags=<flags>
Try a decoder command [VIDIOC_TRY_DECODER_CMD]
See --decoder-cmd for the arguments.
Video Streaming options:
--stream-count=<count>
stream <count> buffers. The default is to keep streaming
forever. This count does not include the number of initial
skipped buffers as is passed by --stream-skip.
--stream-skip=<count>
skip the first <count> buffers. The default is 0.
--stream-sleep=<count>
sleep for 1 second every <count> buffers. If <count> is 0,
then sleep forever right after streaming starts. The default
is -1 (never sleep).
--stream-to=<file> stream to this file. The default is to discard the
data. If <file> is '-', then the data is written to stdout
and the --silent option is turned on automatically.
--stream-to-host=<hostname[:port]> stream to this host. The default port is 8362.
--stream-poll use non-blocking mode and select() to stream.
--stream-mmap=<count>
capture video using mmap() [VIDIOC_(D)QBUF]
count: the number of buffers to allocate. The default is 3.
--stream-user=<count>
capture video using user pointers [VIDIOC_(D)QBUF]
count: the number of buffers to allocate. The default is 3.
--stream-dmabuf capture video using dmabuf [VIDIOC_(D)QBUF]
Requires a corresponding --stream-out-mmap option.
--stream-from=<file> stream from this file. The default is to generate a pattern.
If <file> is '-', then the data is read from stdin.
--stream-from-host=<hostname[:port]> stream from this host. The default port is 8362.
--stream-loop loop when the end of the file we are streaming from is reached.
The default is to stop.
--stream-out-pattern=<count>
choose output test pattern. The default is 0.
--stream-out-square
show a square in the middle of the output test pattern.
--stream-out-border
show a border around the pillar/letterboxed video.
--stream-out-sav insert an SAV code in every line.
--stream-out-eav insert an EAV code in every line.
--stream-out-pixel-aspect=<aspect
select a pixel aspect ratio. The default is to autodetect.
<aspect> can be one of: square, ntsc, pal
--stream-out-video-aspect=<aspect
select a video aspect ratio. The default is to use the frame ratio.
<aspect> can be one of: 4x3, 14x9, 16x9, anamorphic
--stream-out-alpha=<alpha-value>
value to use for the alpha component, range 0-255. The default is 0.
--stream-out-alpha-red-only
only use the --stream-out-alpha value for the red colors,
for all others use 0.
--stream-out-rgb-lim-range
Encode RGB values as limited [16-235] instead of full range.
--stream-out-hor-speed=<speed>
choose speed for horizontal movement. The default is 0,
and the range is [-3...3].
--stream-out-vert-speed=<speed>
choose speed for vertical movement. The default is 0,
and the range is [-3...3].
--stream-out-perc-fill=<percentage>
percentage of the frame to actually fill. The default is 100%.
--stream-out-mmap=<count>
output video using mmap() [VIDIOC_(D)QBUF]
count: the number of buffers to allocate. The default is 4.
--stream-out-user=<count>
output video using user pointers [VIDIOC_(D)QBUF]
count: the number of buffers to allocate. The default is 4.
--stream-out-dmabuf
output video using dmabuf [VIDIOC_(D)QBUF]
Requires a corresponding --stream-mmap option.
--list-patterns list available patterns for use with --stream-pattern.
--list-buffers list all video buffers [VIDIOC_QUERYBUF]
--list-buffers-out list all video output buffers [VIDIOC_QUERYBUF]
--list-buffers-vbi list all VBI buffers [VIDIOC_QUERYBUF]
--list-buffers-vbi-out
list all VBI output buffers [VIDIOC_QUERYBUF]
--list-buffers-sliced-vbi
list all sliced VBI buffers [VIDIOC_QUERYBUF]
--list-buffers-sliced-vbi-out
list all sliced VBI output buffers [VIDIOC_QUERYBUF]
--list-buffers-sdr
list all SDR RX buffers [VIDIOC_QUERYBUF]
--list-buffers-sdr-out
list all SDR TX buffers [VIDIOC_QUERYBUF]
EDID options:
--set-edid=pad=<pad>[,type=<type>|file=<file>][,format=<fmt>][modifiers]
<pad> is the input or output index for which to set the EDID.
<type> can be 'hdmi', 'hdmi-4k-170mhz', 'hdmi-4k-300mhz', 'hdmi-4k-600mhz',
'dvid' or 'vga'. A predefined EDID suitable for that connector type will be
set. It has a 1920x1080p60 native resolution for the non-4k variants and a
3840x2160 resolution for the 4k variants (4kp30 YCbCr 4:2:0 for 170mhz, 4kp30
for 300 mhz and 4kp60 for 600 mhz).
If <file> is '-', then the data is read from stdin, otherwise it is
read from the given file. The file format must be in hex as in get-edid.
The 'type' or 'file' arguments are mutually exclusive. One of the two
must be specified.
<fmt> is one of:
hex: hex numbers in ascii text (default)
raw: raw binary EDID content
[modifiers] is a comma-separate list of EDID modifiers:
CEA-861 Header modifiers:
underscan: toggle the underscan bit.
audio: toggle the audio bit.
ycbcr444: toggle the YCbCr 4:4:4 bit.
ycbcr422: toggle the YCbCr 4:2:2 bit.
Speaker Allocation Data Block modifiers:
fl-fr: Front Left and Front Right.
lfe: Low Frequence Effects.
fc: Front Center.
rl-rr: Rear Left and Rear Right.
rc: Rear Center.
flc-frc: Front Left Center and Front Right Center.
rlc-rrc: Rear Left Center and Rear Right Center.
flw-frw: Front Left Wide and Front Right Wide.
flh-frh: Front Left High and Front Right High.
tc: Top Center.
fch: Front Center High.
HDMI Vendor-Specific Data Block modifiers:
pa=<pa>: change the physical address.
y444: toggle the YCbCr 4:4:4 Deep Color bit.
30-bit: toggle the 30 bits/pixel bit.
36-bit: toggle the 36 bits/pixel bit.
48-bit: toggle the 48 bits/pixel bit.
graphics: toggle the Graphics Content Type bit.
photo: toggle the Photo Content Type bit.
cinema: toggle the Cinema Content Type bit.
game: toggle the Game Content Type bit.
HDMI Forum Vendor-Specific Data Block modifiers:
scdc: toggle the SCDC Present bit.
CEA-861 Video Capability Descriptor modifiers:
qy: toggle the QY YCC Quantization Range bit.
qs: toggle the QS RGB Quantization Range bit.
s-pt=<0-3>: set the PT Preferred Format Over/underscan bits.
s-it=<0-3>: set the IT Over/underscan bits.
s-ce=<0-3>: set the CE Over/underscan bits.
CEA-861 Colorimetry Data Block modifiers:
xvycc-601: toggle the xvYCC 601 bit.
xvycc-709: toggle the xvYCC 709 bit.
sycc: toggle the sYCC 601 bit.
adobe-ycc: toggle the Adobe YCC 601 bit.
adobe-rgb: toggle the Adobe RGB bit.
bt2020-rgb: toggle the BT2020 RGB bit.
bt2020-ycc: toggle the BT2020 YCC bit.
bt2020-cycc: toggle the BT2020 cYCC bit.
CEA-861 HDR Static Metadata Data Block modifiers:
sdr: toggle the Traditional gamma SDR bit.
hdr: toggle the Traditional gamma HDR bit.
smpte2084: toggle the SMPTE ST 2084 bit.
--clear-edid=<pad>
<pad> is the input or output index for which to clear the EDID.
--info-edid=<pad> print the current EDID's modifiers
<pad> is the input or output index for which to get the EDID.
--get-edid=pad=<pad>,startblock=<startblock>,blocks=<blocks>,format=<fmt>,file=<file>
<pad> is the input or output index for which to get the EDID.
<startblock> is the first block number you want to read. Default 0.
<blocks> is the number of blocks you want to read. Default is
all blocks.
<fmt> is one of:
hex: hex numbers in ascii text (default)
raw: can be piped directly into the edid-decode tool
carray: c-program struct
If <file> is '-' or not the 'file' argument is not supplied, then the data
is written to stdout.
--fix-edid-checksums
If specified then any checksum errors will be fixed silently.
3. Examples[edit | edit source]
Refer to V4L2 camera overview ("how to use the framework" chapter) for examples of usage.
4. References[edit | edit source]