Last edited 4 years ago

OpenSTLinux BSP architecture overview

This message will disappear after all relevant tasks have been resolved.
Semantic MediaWiki
There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The OpenSTLinux BSP encompasses the following components:

  • The boot chain based on TF-A and U-Boot
  • The OP-TEE secure OS running on the Cortex-A in secure mode
  • The Linux kernel running on the Cortex-A in non-secure mode

The figure below is clickable so that the user can directly jump to one of the sub-levels listed above.

Zoom out to OpenSTLinux distribution
OP-TEE overviewTF-A overviewU-Boot overviewSTM32MP15 Linux kernel overviewBoot chains overview
OpenSTLinux BSP architecture overview



Board support package

Trusted Firmware for Arm Cortex-A

Das U-Boot -- the Universal Boot Loader (see U-Boot_overview)

Open Portable Trusted Execution Environment

Operating System

Cortex®

Linux® is a registered trademark of Linus Torvalds.

Board support package

Trusted Firmware for Arm Cortex-A

Das U-Boot -- the Universal Boot Loader (see U-Boot_overview)

Open Portable Trusted Execution Environment

Operating System

Cortex®

Linux® is a registered trademark of Linus Torvalds.

Arm® is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. Arm logo.png

Retrieved from "https://wiki.st.com/stm32mpu-ecosystem-v2/index.php?title=OpenSTLinux_BSP_architecture_overview&oldid=63562"