STM32CubeProgrammer release note: Difference between revisions

This message will disappear after all relevant tasks have been resolved.

Semantic MediaWiki

There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

VisualWikitext

Latest revision as of 11:49, 23 March 2021

STM32CubeProgrammer is the official STMicroelectronics tool to download firmware into STMicroelectronics boards.

1. STM32CubeProgrammer - Version 2.7.0[edit source]

	STM32CubeProgrammer for Linux^® host PC	STM32CubeProgrammer for Windows^® host PC
Download	Version 2.7.0 Browse SetupSTM32CubeProgrammer link and follow instructions to download the package, you need a myST account. Download the archive file on your host PC in a temporary directory Uncompress the archive file to get the STM32CubeProgrammer installers: unzip en.stm32cubeprog.zip
Installation	Execute the Linux installer, which guides you through the installation process. $> ./SetupSTM32CubeProgrammer-2.7.0.linux The path to the STM32CubeProgrammer binary must be added to the PATH environment variable either in each Terminal program in which the STM32CubeProgrammer binary needs to be used, using the following command: $> export PATH=<my STM32CubeProgrammer install directory>/bin:$PATH or once for all by creating a link to the STM32CubeProgrammer binary in a directory already present in PATH. For example, if "/home/bin" is in the PATH environment variable, run the following command: $> ln -s <my STM32CubeProgrammer install directory>/bin/STM32_Programmer_CLI /home/bin/STM32_Programmer_CLI	Execute the Windows installer, which guides you through the installation process.
User manual	Instructions to follow for using the STM32CubeProgrammer can be found in user manual, UM2237 available from ST web site, or in STM32CubeProgrammer#How to flash with STM32CubeProgrammer article.
Detailed release note	Details about the content of this tool version are available from ST web site at Release Note .

@@ Line 3: / Line 3: @@
 STM32CubeProgrammer is the '''official''' STMicroelectronics tool '''to download firmware into STMicroelectronics boards'''.
-==STM32CubeProgrammer - Version 2.2.0==
+==STM32CubeProgrammer - Version 2.7.0==
 <onlyinclude>
-{| class="wikitable" width=98%
+{| class="st-table" width=98%
 |-
-!  !! STM32CubeProgrammer for Linux<sup>&reg;</sup> host PC!! STM32CubeProgrammer for Windows<sup>&reg;</sup> host PC
+!  !! style="text-align:center;"|STM32CubeProgrammer for Linux<sup>&reg;</sup> host PC!! style="text-align:center;"|STM32CubeProgrammer for Windows<sup>&reg;</sup> host PC
 |-
 | '''Download'''
 | colspan="2" |
-'''Version 2.2.0'''
+'''Version 2.7.0'''
-* To access the [https://www.st.com/en/development-tools/stm32cubeprog.html SetupSTM32CubeProgrammer] link and follow instructions to download the package, you need a myST account
+* Browse  [https://www.st.com/en/development-tools/stm32cubeprog.html SetupSTM32CubeProgrammer] link and follow instructions to download the package, you need a myST account.
 * Download the archive file on your host PC in a temporary directory
 * Uncompress the archive file to get the STM32CubeProgrammer installers:
@@ Line 24: / Line 24: @@
 * Execute the Linux installer, which guides you through the installation process.
-<pre>./SetupSTM32CubeProgrammer-2.2.0.linux</pre>
+<pre>$> ./SetupSTM32CubeProgrammer-2.7.0.linux</pre>
 * The path to the STM32CubeProgrammer binary must be added to the PATH environment variable
 ** either in each Terminal program in which the STM32CubeProgrammer binary needs to be used, using the following command:
 <pre style="white-space: pre-wrap">
-export PATH=<my STM32CubeProgrammer install directory>/bin:$PATH
+$> export PATH=<my STM32CubeProgrammer install directory>/bin:$PATH
 </pre>
 :* or once for all by creating a link to the STM32CubeProgrammer binary in a directory already present in PATH. For example, if "/home/bin" is in the PATH environment variable, run the following command:
 <pre style="white-space: pre-wrap">
-ln -s <my STM32CubeProgrammer install directory>/bin/STM32_Programmer_CLI /home/bin/STM32_Programmer_CLI
+$> ln -s <my STM32CubeProgrammer install directory>/bin/STM32_Programmer_CLI /home/bin/STM32_Programmer_CLI
 </pre>
 ||
@@ Line 41: / Line 41: @@
 | colspan="2" |
-* Instructions to follow for using the STM32CubeProgrammer can be found in user manual, [https://www.st.com/resource/en/user_manual/dm00403500.pdf UM2237] available from ST web site, or in [[STM32CubeProgrammer#How to flash with STM32CubeProgrammer]] article.
+* Instructions to follow for using the STM32CubeProgrammer can be found in user manual, [[STM32MP15 resources#UM2237|UM2237]] available from ST web site, or in [[STM32CubeProgrammer#How to flash with STM32CubeProgrammer]] article.
 |-
 | '''Detailed release note'''