This message will disappear after all relevant tasks have been resolved.
Semantic MediaWiki
There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.The following pages link to File:Publication request.png:
Displayed 500 items.
- STM32 MPU boards (file link) (← links)
- Getting started with software distributions (file link) (← links)
- Online Linux trainings (file link) (← links)
- STM32MP15 boards (file link) (← links)
- STM32MP15 peripherals overview (file link) (← links)
- Which STM32MPU Embedded Software Package better suits your needs (file link) (← links)
- How to get Terminal (file link) (← links)
- Blktrace (file link) (← links)
- Ethtool (file link) (← links)
- Ifconfig (file link) (← links)
- NEON overview (file link) (← links)
- Ltrace (file link) (← links)
- OpenEmbedded (file link) (← links)
- OpenEmbedded - devtool (file link) (← links)
- Tcpdump (file link) (← links)
- How to setup wifi connection (file link) (← links)
- Linux tracing, monitoring and debugging (file link) (← links)
- IP Linux command line (file link) (← links)
- Wayland Weston overview (file link) (← links)
- GStreamer overview (file link) (← links)
- I2C overview (file link) (← links)
- I2C i2c-tools (file link) (← links)
- IIO overview (file link) (← links)
- OP-TEE overview (file link) (← links)
- GDB (file link) (← links)
- PC prerequisites (file link) (← links)
- How to avoid proxy issues (file link) (← links)
- Overview of embedded software architectures (file link) (← links)
- WLAN overview (file link) (← links)
- How to use the IIO user space interface (file link) (← links)
- IIO libiio (file link) (← links)
- IIO Linux kernel tools (file link) (← links)
- Strace (file link) (← links)
- Netstat (file link) (← links)
- Perf (file link) (← links)
- Sysstat tool suite (file link) (← links)
- LTTng (file link) (← links)
- Menuconfig or how to configure kernel (file link) (← links)
- Ftrace (file link) (← links)
- ADC internal peripheral (file link) (← links)
- DAC internal peripheral (file link) (← links)
- DFSDM internal peripheral (file link) (← links)
- CAN overview (file link) (← links)
- Crypto API overview (file link) (← links)
- CEC overview (file link) (← links)
- OpenSTLinux BSP architecture overview (file link) (← links)
- U-Boot overview (file link) (← links)
- Yavta (file link) (← links)
- Boot chain overview (file link) (← links)
- TF-A overview (file link) (← links)
- How to debug Weston (file link) (← links)
- How to test and benchmark OpenGLES (file link) (← links)
- How to launch Khronos OpenGLES conformance tests (file link) (← links)
- How to launch glmark2 benchmark (file link) (← links)
- OpenVG overview (file link) (← links)
- Serial TTY overview (file link) (← links)
- TTY tools (file link) (← links)
- How to use TTY with User Terminal (file link) (← links)
- Security overview (file link) (← links)
- Overview of GPIO pins (file link) (← links)
- How to create a new open embedded layer (file link) (← links)
- SDK for OpenSTLinux distribution (file link) (← links)
- Pinctrl overview (file link) (← links)
- IPCC internal peripheral (file link) (← links)
- Coprocessor management overview (file link) (← links)
- Linux remoteproc framework overview (file link) (← links)
- Linux RPMsg framework overview (file link) (← links)
- GPIOLib overview (file link) (← links)
- How to control a GPIO in userspace (file link) (← links)
- How to control a GPIO in kernel space (file link) (← links)
- GPIO internal peripheral (file link) (← links)
- Linux Mailbox framework overview (file link) (← links)
- V4L2 camera overview (file link) (← links)
- DCMI internal peripheral (file link) (← links)
- Git (file link) (← links)
- MB1230 (file link) (← links)
- MB1262 (file link) (← links)
- MB1263 (file link) (← links)
- MB1379 (file link) (← links)
- STM32MP15 Evaluation boards - getting started (file link) (← links)
- STM32MP15 Evaluation boards - starting for the first time (file link) (← links)
- STM32MP15 Evaluation boards - Starter Package (file link) (← links)
- STM32MP15 Evaluation boards - required material (file link) (← links)
- STM32MP1 Distribution Package (file link) (← links)
- STM32MP15 RAM mapping (file link) (← links)
- STM32MP15 Flash mapping (file link) (← links)
- STM32CubeProgrammer (file link) (← links)
- STM32CubeMX (file link) (← links)
- STM32MP15 clock tree (file link) (← links)
- How to use the kernel dynamic debug (file link) (← links)
- STM32MP1 Developer Package (file link) (← links)
- RCC internal peripheral (file link) (← links)
- STM32MPU Embedded Software distribution (file link) (← links)
- OpenSTLinux distribution (file link) (← links)
- OpenSTLinux architecture overview (file link) (← links)
- STM32MPU Embedded Software architecture overview (file link) (← links)
- STM32MP15 microprocessor (file link) (← links)
- Getting started with STM32 MPU devices (file link) (← links)
- BSEC internal peripheral (file link) (← links)
- TZC internal peripheral (file link) (← links)
- SDMMC internal peripheral (file link) (← links)
- PWR internal peripheral (file link) (← links)
- STM32MP15 Linux kernel overview (file link) (← links)
- Linux application frameworks overview (file link) (← links)
- RTC internal peripheral (file link) (← links)
- CRYP internal peripheral (file link) (← links)
- Watchdog overview (file link) (← links)
- Regulator overview (file link) (← links)
- PWM overview (file link) (← links)
- Interrupt overview (file link) (← links)
- File Hierarchy Standard (FHS) (file link) (← links)
- Development setup for STM32MPU Embedded Software (file link) (← links)
- U-Boot - How to debug (file link) (← links)
- STM32MP15 U-Boot (file link) (← links)
- Pseudo filesystem (file link) (← links)
- Standard SDK directory structure (file link) (← links)
- Coprocessor resource table (file link) (← links)
- How to populate the SD card with dd command (file link) (← links)
- Cross-compile with OpenSTLinux SDK (file link) (← links)
- How to cross-compile with the Developer Package (file link) (← links)
- STM32MP157x-EV1 - board connections (file link) (← links)
- STM32MP157x-EV1 - board assembly (file link) (← links)
- STM32MP157x-EV1 - hardware description (file link) (← links)
- STGEN internal peripheral (file link) (← links)
- SYSCFG internal peripheral (file link) (← links)
- EXTI internal peripheral (file link) (← links)
- GIC internal peripheral (file link) (← links)
- NVIC internal peripheral (file link) (← links)
- IWDG internal peripheral (file link) (← links)
- WWDG internal peripheral (file link) (← links)
- DMAMUX internal peripheral (file link) (← links)
- DMA internal peripheral (file link) (← links)
- MDMA internal peripheral (file link) (← links)
- SYSRAM internal memory (file link) (← links)
- MCU SRAM internal memory (file link) (← links)
- BKPSRAM internal memory (file link) (← links)
- RETRAM internal memory (file link) (← links)
- LPTIM internal peripheral (file link) (← links)
- TIM internal peripheral (file link) (← links)
- VREFBUF internal peripheral (file link) (← links)
- SPDIFRX internal peripheral (file link) (← links)
- SAI internal peripheral (file link) (← links)
- FDCAN internal peripheral (file link) (← links)
- ETH internal peripheral (file link) (← links)
- USBH internal peripheral (file link) (← links)
- OTG internal peripheral (file link) (← links)
- USART internal peripheral (file link) (← links)
- SPI internal peripheral (file link) (← links)
- I2C internal peripheral (file link) (← links)
- GPU internal peripheral (file link) (← links)
- DSI internal peripheral (file link) (← links)
- LTDC internal peripheral (file link) (← links)
- CEC internal peripheral (file link) (← links)
- DTS internal peripheral (file link) (← links)
- RNG internal peripheral (file link) (← links)
- HASH internal peripheral (file link) (← links)
- CRC internal peripheral (file link) (← links)
- TAMP internal peripheral (file link) (← links)
- PC prerequisites about STM32MPU distribution for Android (file link) (← links)
- Internal peripherals assignment table template (file link) (← links)
- STM32MP15 TF-A (file link) (← links)
- How to create an SDK for OpenSTLinux distribution (file link) (← links)
- TF-A - How to debug (file link) (← links)
- Weston keyboard shortcuts (file link) (← links)
- How to make a screen capture in Weston (file link) (← links)
- How to make a video capture of Weston desktop (file link) (← links)
- Power overview (file link) (← links)
- Dmaengine overview (file link) (← links)
- Reserved memory (file link) (← links)
- STM internal peripheral (file link) (← links)
- Clock overview (file link) (← links)
- Reset overview (file link) (← links)
- DBGMCU internal peripheral (file link) (← links)
- HDP internal peripheral (file link) (← links)
- How to transfer a file over serial console (file link) (← links)
- STM32CubeProgrammer flashlayout (file link) (← links)
- Dmesg and Linux kernel log (file link) (← links)
- V4l2-ctl (file link) (← links)
- Gst-play (file link) (← links)
- How to display an image using Weston (file link) (← links)
- How to play a video (file link) (← links)
- Bluetooth overview (file link) (← links)
- How to get video details (file link) (← links)
- STM32MP15 ecosystem release note (file link) (← links)
- STM32MP15 OpenSTLinux release note (file link) (← links)
- STM32CubeProgrammer release note (file link) (← links)
- Example of directory structure for Packages (file link) (← links)
- Netdata (file link) (← links)
- Trace and debug tools assignment table template (file link) (← links)
- STM32MP1 Developer Package - STM32CubeMP1 Package (file link) (← links)
- KeyGen release note (file link) (← links)
- Signing tool release note (file link) (← links)
- OpenSTLinux directory structure (file link) (← links)
- Gdbgui (file link) (← links)
- Gst-typefind (file link) (← links)
- Ethernet overview (file link) (← links)
- GDB commands (file link) (← links)
- Kmemleak (file link) (← links)
- Sysprof (file link) (← links)
- Valgrind (file link) (← links)
- Internal peripherals software table template (file link) (← links)
- How to transfer a file over network (file link) (← links)
- ADC device tree configuration (file link) (← links)
- ADC Linux driver (file link) (← links)
- How to find Linux kernel driver associated to a device (file link) (← links)
- Gst-discoverer (file link) (← links)
- Core dump (file link) (← links)
- Pinctrl device tree configuration (file link) (← links)
- LPTIM device tree configuration (file link) (← links)
- Trace-cmd and kernelshark trace viewer (file link) (← links)
- LPTIM Linux driver (file link) (← links)
- GPIO device tree configuration (file link) (← links)
- Trace and debug tools (file link) (← links)
- TIM Linux driver (file link) (← links)
- TIM device tree configuration (file link) (← links)
- SDMMC device tree configuration (file link) (← links)
- How to diagnose a boot failure (file link) (← links)
- QUADSPI device tree configuration (file link) (← links)
- SAI device tree configuration (file link) (← links)
- Soundcard configuration (file link) (← links)
- STM32MP1 Platform trace and debug environment overview (file link) (← links)
- How to populate and boot a board with OP-TEE (file link) (← links)
- Serial TTY device tree configuration (file link) (← links)
- MB1407 (file link) (← links)
- MB1272 (file link) (← links)
- STM32MP157x-DKx - board connections (file link) (← links)
- STM32MP15 Discovery kits - starting for the first time (file link) (← links)
- STM32MP157x-DKx - board assembly (file link) (← links)
- STM32MP157x-DKx - hardware description (file link) (← links)
- STM32MP15 Discovery kits - getting started (file link) (← links)
- STM32MP15 Discovery kits - required material (file link) (← links)
- STM32MP15 Discovery kits - Starter Package (file link) (← links)
- USBH device tree configuration (file link) (← links)
- I2C device tree configuration (file link) (← links)
- USBPHYC internal peripheral (file link) (← links)
- OTG device tree configuration (file link) (← links)
- How to display on HDMI (file link) (← links)
- How to create your own machine (file link) (← links)
- Bluetooth device tree configuration (file link) (← links)
- How to create your own image (file link) (← links)
- SAI Linux driver (file link) (← links)
- How to create your own distribution (file link) (← links)
- DMAMUX device tree configuration (file link) (← links)
- DMA device tree configuration (file link) (← links)
- MDMA device tree configuration (file link) (← links)
- DAC device tree configuration (file link) (← links)
- DAC Linux driver (file link) (← links)
- Debugging the Linux kernel using the GDB (file link) (← links)
- Hardware random overview (file link) (← links)
- RNG device tree configuration (file link) (← links)
- CRYP device tree configuration (file link) (← links)
- CRC device tree configuration (file link) (← links)
- HASH device tree configuration (file link) (← links)
- GStreamer troubleshooting grid (file link) (← links)
- Wayland Weston troubleshooting grid (file link) (← links)
- How to add a customer application (file link) (← links)
- WLAN device tree configuration (file link) (← links)
- How to customize the Linux kernel (file link) (← links)
- SPDIFRX device tree configuration (file link) (← links)
- DFSDM device tree configuration (file link) (← links)
- DFSDM Linux driver (file link) (← links)
- Ethernet device tree configuration (file link) (← links)
- NVMEM overview (file link) (← links)
- IWDG device tree configuration (file link) (← links)
- USBPHYC device tree configuration (file link) (← links)
- How to access information in sysfs (file link) (← links)
- How to configure the Weston keyboard layout (file link) (← links)
- STM32MP1 Developer Package - debug symbol files (file link) (← links)
- LEDs and buttons on STM32 MPU boards (file link) (← links)
- How to configure uniprocessor mode (file link) (← links)
- How to integrate an external software package (file link) (← links)
- How to boot the kernel via TFTP from U-Boot (file link) (← links)
- How to update U-Boot (file link) (← links)
- LTDC device tree configuration (file link) (← links)
- CEC device tree configuration (file link) (← links)
- GPU device tree configuration (file link) (← links)
- DSI device tree configuration (file link) (← links)
- How to stop and start Weston (file link) (← links)
- DCMI device tree configuration (file link) (← links)
- How to make a camera preview (file link) (← links)
- How to stream camera over network (file link) (← links)
- Trace and debug scenario - UART issue (file link) (← links)
- FDCAN device tree configuration (file link) (← links)
- How to set up a SocketCAN interface (file link) (← links)
- How to send or receive CAN data (file link) (← links)
- Clock device tree configuration (file link) (← links)
- How to enable earlyprintk for Linux kernel (file link) (← links)
- Audio codecs hardware components (file link) (← links)
- How to support UBIFS through MTD (file link) (← links)
- How to configure ethernet interface (file link) (← links)
- How to perform ssh connection (file link) (← links)
- How to perform ping test (file link) (← links)
- Coprocessor power management (file link) (← links)
- Configfs (file link) (← links)
- How to configure a wlan interface on client mode (file link) (← links)
- How to configure a wlan interface on hotspot mode (file link) (← links)
- WLAN and Bluetooth hardware component (file link) (← links)
- Troubleshooting grid table template (file link) (← links)
- Visual troubleshooting grid (file link) (← links)
- How to set up a Bluetooth connection (file link) (← links)
- How to scan Bluetooth devices (file link) (← links)
- How to scan BLE devices (file link) (← links)
- OpenSTLinux filesystem (file link) (← links)
- How to profile video framerate (file link) (← links)
- How to monitor the display framerate (file link) (← links)
- Hardware spinlock overview (file link) (← links)
- HSEM internal peripheral (file link) (← links)
- STM32MP15 resources (file link) (← links)
- QT overview (file link) (← links)
- Top Linux command line (file link) (← links)
- How to control a RNG in userspace (file link) (← links)
- Networking overview (file link) (← links)
- How to retrieve Cortex-M4 logs after crash (file link) (← links)
- How to monitor the GCNANO GPU load (file link) (← links)
- DRM KMS troubleshooting grid (file link) (← links)
- GPU troubleshooting grid (file link) (← links)
- How to play audio (file link) (← links)
- OpenSTLinux licenses (file link) (← links)
- Development zone (file link) (← links)
- Getting started (file link) (← links)
- Reading tips (file link) (← links)
- Getting started/STM32MP1 boards (file link) (← links)
- How to assign an internal peripheral to a runtime context (file link) (← links)
- Device tree (file link) (← links)
- STM32CubeMP1 architecture (file link) (← links)
- Debugfs (file link) (← links)
- ALSA overview (file link) (← links)
- STM32MP15 ROM code overview (file link) (← links)
- STM32CubeMP1 Package (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2 (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1 (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Let's start (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Let's start (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-A7 (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-A7 (file link) (← links)
- USB overview (file link) (← links)
- DDRCTRL and DDRPHYC internal peripherals (file link) (← links)
- SPI overview (file link) (← links)
- How to cross-compile with the Distribution Package (file link) (← links)
- RTC overview (file link) (← links)
- STM32MP15 device tree (file link) (← links)
- Network tools (file link) (← links)
- Thermal overview (file link) (← links)
- HDP Linux driver (file link) (← links)
- I2S Linux driver (file link) (← links)
- KeyGen tool (file link) (← links)
- Signing tool (file link) (← links)
- BitBake cheat sheet (file link) (← links)
- DRM KMS overview (file link) (← links)
- PHY overview (file link) (← links)
- STM32MP15 secure boot (file link) (← links)
- CMSIS-SVD environment and scripts (file link) (← links)
- ETZPC device tree configuration (file link) (← links)
- Embedded software (file link) (← links)
- How to (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-M4 (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-M4 (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Let's start/Unpack the STM32MP157x-DK2 board (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Let's start/Populate the target and boot the image (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Let's start/Execute basic commands (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Let's start/Use the demo launcher (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-A7/Install the SDK (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-A7/Create a simple hello-world application (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-A7/Modify, rebuild and reload the Linux® kernel (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-M4/Install the IDE (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-M4/Install STM32Cube MP1 package (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/Develop on Arm® Cortex®-M4/Modify, rebuild and reload a firmware (file link) (← links)
- Contributing to this user guide (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-DK2/What's next (file link) (← links)
- How to activate HSI and CSI oscillators calibration (file link) (← links)
- How to configure Weston screen resolution (file link) (← links)
- How to start the coprocessor from the bootloader (file link) (← links)
- How to use TTY from an application (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/What's next (file link) (← links)
- PMIC hardware components (file link) (← links)
- RTC device tree configuration (file link) (← links)
- Reset device tree configuration (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Let's start/Unpack the STM32MP157x-EV1 board (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Let's start/Populate the target and boot the image (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Let's start/Execute basic commands (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Let's start/Use the demo launcher (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-A7/Install the SDK (file link) (← links)
- Tools (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-A7/Create a simple hello-world application (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-A7/Modify, rebuild and reload the Linux® kernel (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-M4/Install the IDE (file link) (← links)
- STM32MPU Embedded Software distribution for Android (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-M4/Install STM32Cube MP1 package (file link) (← links)
- Getting started/STM32MP1 boards/STM32MP157x-EV1/Develop on Arm® Cortex®-M4/Modify, rebuild and reload a firmware (file link) (← links)
- STM32MP1 Platform trace and debug environment overview for Android (file link) (← links)
- STM32MP15 Evaluation boards - Starter Package for Android (file link) (← links)
- STM32MP1 Developer Package for Android (file link) (← links)
- STM32MP1 Distribution Package for Android (file link) (← links)
- STM32MPU Embedded Software for Android architecture overview (file link) (← links)
- STM32MPU distribution for Android (file link) (← links)
- Install the SDK (file link) (← links)
- Create a simple hello-world application (file link) (← links)
- Modify, rebuild and reload the Linux® kernel (file link) (← links)
- Install the IDE (file link) (← links)
- Develop on Arm® Cortex®-M4 (file link) (← links)
- Develop on Arm® Cortex®-A7 (file link) (← links)
- Install STM32Cube MP1 package (file link) (← links)
- Populate the target and boot the image (file link) (← links)
- What's next (file link) (← links)
- ALSA troubleshooting grid (file link) (← links)
- Audio troubleshooting grid (file link) (← links)
- Camera sensors hardware components (file link) (← links)
- Clock device tree configuration - Bootloader specific (file link) (← links)
- Display bridges hardware components (file link) (← links)
- Display panels hardware components (file link) (← links)
- Dpkg (file link) (← links)
- GTK demo launcher (file link) (← links)
- HDP device tree configuration (file link) (← links)
- How to accelerate JPEG compression and decompression (file link) (← links)
- How to calibrate the touchscreen (file link) (← links)
- How to change the CPU frequency (file link) (← links)
- How to check that a device tree resource is correctly set (file link) (← links)
- How to configure system resources (file link) (← links)
- How to create your product from design to manufacturing (file link) (← links)
- How to detect memory leaks (file link) (← links)
- How to disable one CPU (file link) (← links)
- How to get DRM KMS logs (file link) (← links)
- How to get name and current status of a DRM connector (file link) (← links)
- How to install JAVA JDK (file link) (← links)
- How to modify the panel backlight (file link) (← links)
- How to optimize the boot time (file link) (← links)
- How to record audio (file link) (← links)
- OP-TEE - How to debug (file link) (← links)
- Platform configuration overview (file link) (← links)
- SPI device tree configuration (file link) (← links)
- ST-LINK (file link) (← links)
- STM32CubeMP1 development guidelines (file link) (← links)
- STM32CubeMP1 Package release note (file link) (← links)
- STM32CubeProgrammer OTP management (file link) (← links)
- STM32MP15 ecosystem errata sheet (file link) (← links)
- STM32MP15 OP-TEE (file link) (← links)
- U-Boot SPL: DDR interactive mode (file link) (← links)
- Modify, rebuild and reload a firmware (file link) (← links)
- How to use STM32CubeProgrammer to populate a board (file link) (← links)
- How to compile the device tree with the Distribution Package (file link) (← links)
- How to build Linux kernel user space tools (file link) (← links)
- Networking troubleshooting grid (file link) (← links)
- I2S device tree configuration (file link) (← links)
- IKS01A2 MEMS expansion board (file link) (← links)
- Android application frameworks overview (file link) (← links)
- IDE (file link) (← links)
- How to protect the coprocessor firmware (file link) (← links)
- How to integrate AWS IoT Greengrass (file link) (← links)
- Which STM32MPU Embedded Software Package for Android better suits your needs (file link) (← links)
- How to exchange large data buffers with the coprocessor - example (file link) (← links)
- BSEC device tree configuration (file link) (← links)
- STM32MP15 Flash mapping for Android (file link) (← links)
- Which Package better suits your needs (file link) (← links)
- Exchanging buffers with the coprocessor (file link) (← links)
- Perfetto (file link) (← links)
- How to use SPI from Linux userland with spidev (file link) (← links)
- ADB (file link) (← links)
- How to build and install an SDK for Android (file link) (← links)
- How to add a custom service for Android (file link) (← links)
- STM32MPU distribution for Android licenses (file link) (← links)
- How to use coprocessor service for Android (file link) (← links)
- How to change audio device for Android (file link) (← links)
- How to change Bluetooth device for Android (file link) (← links)
- How to change Wi-Fi device for Android (file link) (← links)
- How to build kernel for Android (file link) (← links)
- How to build bootloaders for Android (file link) (← links)
- How to build TEE for Android (file link) (← links)
- How to customize kernel for Android (file link) (← links)
- How to build STM32MPU distribution for Android (file link) (← links)
- DDRCTRL and DDRPHYC device tree configuration (file link) (← links)
- How to customize the STM32MPU distribution for Android (file link) (← links)
- Android tracing, monitoring and debugging (file link) (← links)
- How to create your board device tree (file link) (← links)
- How to use the RTC (file link) (← links)
- How to create your own STM32MPU distribution for Android (file link) (← links)
- How to populate boards for Android (file link) (← links)
- Coprocessor management troubleshooting grid (file link) (← links)
- X-NUCLEO NFC05A1 expansion board (file link) (← links)
- Touchscreen hardware components (file link) (← links)
- How to exchange large data buffers with the coprocessor - principle (file link) (← links)
- Hardware (file link) (← links)
- How to integrate AWS IoT Greengrass on top of openSTLinux distribution (file link) (← links)
- How to transfer files using ‘Tera Term’(on Windows PC) to Discovery Kit (file link) (← links)
- How to measure acceleration and orientation (file link) (← links)
- How to measure temperature and humidity (file link) (← links)
- How to classify images with AI (file link) (← links)
- How to detect objects with AI (file link) (← links)
- How to optimize the boot time for Android (file link) (← links)
- STM32MP15 Flash mapping for Android - v1.0.0 (file link) (← links)
- STM32MP15 Flash mapping for Android - v1.1.0 (file link) (← links)
- How to define your low-power strategy (file link) (← links)
- STM32MP15 ROM trace analyzer (file link) (← links)
- Package repository for OpenSTLinux distribution (file link) (← links)
- STM32CubeMP1 Package release note - v1.2.0 (file link) (← links)
- STM32CubeMP1 licenses (file link) (← links)
- How to perform digital signature with TPM (file link) (← links)
- TF-A - Flash memory configuration (file link) (← links)
- Wrapper for FSBL images (file link) (← links)
- How to update OTP with U-Boot (file link) (← links)
- How to configure U-Boot for your board (file link) (← links)