This message will disappear after all relevant tasks have been resolved.
Semantic MediaWiki
There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.Coming soon |
1. System peripherals
GPIO Learn how to use GPIO with a simple example such as LED toggling |
EXTI Learn how to turn on a LED with button/EXTI |
POWER Learn how to use STM32 low power modes(SLEEP, STOP, STANDBY) |
DMA Learn how to setup a DMA transfer with and without interrupt |
2. Basic communication peripherals
UART Learn how to use STM32 MCU UART |
SPI Learn how to use STM32 MCU SPI |
I2C Learn how to use STM32 MCU I2C |
3. Timing peripherals
RTC Learn how to use STM32 MCU RTC |
TIMER Learn how to use STM32 MCU TIMERS |
WDOG Learn how to use STM32 MCU WDOG |
4. Analog peripherals
DAC Learn how to use STM32 MCU DAC |
ADC Learn how to use STM32 MCU ADC |
5. BSP
BSP Learn how to use BSP through SDRAM, LCD, I2C or SPI-Gyroscope |
Pages in category "Getting started with STM32 system peripherals"
The following 14 pages are in this category, out of 14 total.
- Getting started with GPIO
- Getting started with EXTI
- Getting started with PWR
- Getting started with LPBAM
- Getting started with DMA
- Getting started with UART
- Getting started with SPI
- Getting started with I2C
- Getting started with I3C
- Getting started with RTC
- Getting started with WDG
- Getting started with HRTIM
- Getting started with DAC
- Getting started with ADC