Last edited one year ago

How to disable one CPU

Applicable for STM32MP15x lines

This article is only applicable for STMP32 Microprocessor with more than one CPU.

1. How to see the number of active CPU[edit source]

root@st:~# cat /proc/cpuinfo 
processor       : 0
model name      : ARMv7 Processor rev 0 (v7l)
BogoMIPS        : 2387.14
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0

processor       : 1
model name      : ARMv7 Processor rev 0 (v7l)
BogoMIPS        : 2393.70
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0

Hardware        : STi SoC with Flattened Device Tree
Revision        : 0000
Serial          : 0000000000000000

2. How to disable a CPU[edit source]

On this example we disable CPU1

root@st:~# echo 0 > /sys/devices/system/cpu/cpu1/online
CPU1: shutdown
root@st:~# cat /proc/cpuinfo 
processor       : 0
model name      : ARMv7 Processor rev 0 (v7l)
BogoMIPS        : 2387.14
Features        : swp half thumb fastmult vfp edsp neon vfpv3 tls 
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x3
CPU part        : 0xc09
CPU revision    : 0

Hardware        : STi SoC with Flattened Device Tree
Revision        : 0000
Serial          : 0000000000000000

3. How to enable a disabled CPU[edit source]

On this example we enable CPU1

root@st:~# echo 1 > /sys/devices/system/cpu/cpu1/online
CPU1: shutdown