Original file (845 × 1,173 pixels, file size: 281 KB, MIME type: image/jpeg)
|
Source → STMicroelectronics |
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 15:24, 11 October 2024 | | 845 × 1,173 (281 KB) | Registered User |
You cannot overwrite this file.
The following 5 pages use this file:
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.
| Camera manufacturer | samsung |
|---|---|
| Camera model | SM-G780G |
| Exposure time | 1/100 sec (0.01) |
| F Number | f/1.8 |
| ISO speed rating | 250 |
| Date and time of data generation | 15:00, 10 October 2024 |
| Lens focal length | 5.4 mm |
| Width | 4,032 px |
| Height | 2,268 px |
| Orientation | Normal |
| Horizontal resolution | 72 dpi |
| Vertical resolution | 72 dpi |
| File change date and time | 15:00, 10 October 2024 |
| Y and C positioning | Centered |
| Exposure Program | Normal program |
| Exif version | 2.2 |
| Date and time of digitizing | 15:00, 10 October 2024 |
| Meaning of each component |
|
| APEX shutter speed | 6.645 |
| APEX aperture | 1.69 |
| APEX brightness | 1.91 |
| APEX exposure bias | 0 |
| Maximum land aperture | 1.69 APEX (f/1.8) |
| Metering mode | Spot |
| Flash | Flash did not fire |
| DateTime subseconds | 991296 |
| DateTimeOriginal subseconds | 991296 |
| DateTimeDigitized subseconds | 991296 |
| Supported Flashpix version | 1 |
| Color space | sRGB |
| Sensing method | Undefined |
| Scene type | A directly photographed image |
| Exposure mode | Auto exposure |
| White balance | Auto white balance |
| Focal length in 35 mm film | 26 mm |
| Scene capture type | Standard |
Discover STM32 application processors and get ready with industry 4.0 on st.com site
If you have any question or request concerning this wiki or if you see some pages with some mistake, you can report them using ST Support Center or ST Community MPU Forum.
