STM32MP135x-DK - board connections: Difference between revisions

This message will disappear after all relevant tasks have been resolved.

Semantic MediaWiki

There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

Latest revision as of 17:59, 6 March 2023↑

This article presents the recommended connections to start with the STM32MP135x-DK Discovery kit . Part numbers are specified in the STM32MP13 microprocessor part numbers article.

Warning

To start the board successfully, it is recommended to go through the corresponding Starter Package article: Category:Starter Package

STM32MP135F-DK Discovery kit connections. (picture is not contractual)

@@ Line 7: / Line 7: @@
 {{
 ImageMap|Image:STM32MP135x-DKx_connections.png {{!}} thumb {{!}} 800px {{!}} center{{!}} STM32MP135F-DK Discovery kit connections. (picture is not contractual)
-rect 125 106 461 364[[#MB1635 | MB1635 mother board :STM32MP135F 11x11, PMIC, DDR3]]
+rect 144 252 657 648 [[#MB1635|MB1635 mother board :STM32MP135F 11x11, PMIC, DDR3]]
-rect 377 18 440 79[[#MB1723 | MB1723 camera module]]
+rect 487 8 672 144 [[#MB1897|MB1897 camera module]]
-rect 385 79 427 111[[#Flat cable | Camera module flat cable]]
+rect 548 147 611 254 [[#Flat cable|Camera module flat cable]]
-rect 116 187 133 206[[#MicroSD card | microSD™ card slot]]
+rect 107 364 172 405 [[#MicroSD card| microSD™ card slot]]
-rect 456 191 521 219[[#Ethernet | Ethernet 2 → Network]]
+rect 656 379 794 428 [[#Ethernet|Ethernet 2 → Network]]
-rect 456 246 521 275[[#Ethernet | Ethernet 1 → Network]]
+rect 656 473 794 520 [[#Ethernet|Ethernet 1 → Network]]
-rect 71 254 135 282[[#USB micro-B | USB Micro-B (STLINK-V3E) → PC Virtual COM port and debug]]
+rect 1 480 166 523 [[#USB micro-B|USB Micro-B (STLINK-V3E) → PC Virtual COM port and debug]]
-rect 456 311 532 340[[#USB Type-C | USB Type-C© (power 5V-3A)]]
+rect 656 569 794 617 [[#USB Type-C|USB Type-C™ (power 5V-3A)]]
-rect 137 364 169 450[[#USB Type-C2 | USB Type-C© (DRP)]]
+rect 163 645 217 819 [[#USB Type-C|USB Type-C™ (DRP)]]
-rect 177 364 221 450[[#USB Type-A | 1st dual USB Type-A (host) → keyboard, mouse or USB driver ]]
+rect 225 645 306 819 [[#USB Type-A|1st dual USB Type-A (host) → keyboard, mouse or USB driver]]
-rect 233 364  269 422[[#USB Type-A2 | 2nd dual USB Type-A (host) → keyboard, mouse or USB driver ]]
+rect 309 646 375 819 [[#USB Type-A|2nd dual USB Type-A (host) → keyboard, mouse or USB driver]]
-rect 297 328 327 391[[#Reset button | Reset button]]
+rect 409 589 446 693 [[#Reset button|Reset button]]
 }}
-{{ReviewsComments | [[User:Ludovic Bergonzi|Ludovic Bergonzi]] ([[User talk:Ludovic Bergonzi|talk]]) 20:51, 29 March 2022 (CEST) <br /> The picture quality is rather poor. <br> NSA : picture will be udpated for MP13 MM <br> Also, could the digits be written in a color from the ST palette such as the ST pink <br> NSA : done<br> and the highlight frames in another color from the ST palette such as dark blue? <br> NSA : the highlight frames are already in dark blue}}
-{{ReviewsComments | [[User:Ludovic Bergonzi|Ludovic Bergonzi]] ([[User talk:Ludovic Bergonzi|talk]]) 21:06, 29 March 2022 (CEST) <br /> The article shows MB1635 and MB1723 while the technical documents (data brief and user manual) show MB1635 and MB1897.
-The MCD board reference site describes the boards as:
-MB1635	Discovery board for STM32MP1 TinyWildcat.
-MB1723	Module Camera CSI FPC raspberry pi compatible.
-MB1897	Dual lane CSI camera module with 15-pin FFC connector.
-Is it possible to align both descriptions? The new revision of the kit is no more with MB1723 but with MB1897.<br> NSA  :i will do that for MP13  MM}}
 <noinclude>