STM32MP135x-DK - board assembly: Difference between revisions

This message will disappear after all relevant tasks have been resolved.

Semantic MediaWiki

There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

Latest revision as of 17:48, 6 March 2023↑

This article explains how to assemble the STM32MP135x-DK Discovery kit. It is valid for the STM32MP135F-DK Discovery kit : the part numbers are specified in the STM32MP13 microprocessor part numbers article.

Warning

To start the board successfully, it is recommended to go through the corresponding Starter Package article: Category:Starter Package

The STM32MP135F-DK Discovery kit package is composed of the items listed below.


Position	Description
1	MB1635 mother board
2	MB1897 camera module
3	Camera module flat cable
4	microSD™ card

Note that the STM32MP135F-DK Discovery kit delivery does not contain a USB cable or a USB charger.

STM32MP135F-DK Discovery kit assembled.
(picture is not contractual)

@@ Line 1: / Line 1: @@
-<noinclude>{{ApplicableFor
+<noinclude>
-|MPUs list=STM32MP13x
+This article explains how to assemble the STM32MP135x-DK Discovery kit. It is valid for the {{Board | type=135F-DK}}: the part numbers are specified in the [[STM32MP13 microprocessor#Part number codification|STM32MP13 microprocessor part numbers]] article.
-|MPUs checklist=STM32MP13x, STM32MP15x
-}}</noinclude>
-This article explains how to assemble the STM32MP135x-DK Discovery kit. It is valid for the [https://www.st.com/en/product/stm32mp135f-dk STM32MP135F-DK] Discovery kit: the part numbers are specified in the [[STM32MP13 microprocessor#Part number codification|STM32MP13 microprocessor part numbers]] article.
 {{Warning|To start the board successfully, it is recommended to go through the corresponding Starter Package article: [[:Category:Starter Package]]}}
+</noinclude>
-The {{Board | type=135F-DK}} delivery is composed of the items listed below.<br>
+The {{Board | type=135F-DK}} package is composed of the items listed below.<br>
 {|
 |+
@@ Line 14: / Line 11: @@
 | 1 || MB1635 mother board
 |-
-| 2  <span id{{=}}"MB1723"></span> ||MB1723 camera module
+| 2  <span id{{=}}"MB1897"></span> || MB1897 camera module
 |-
 | 3 || Camera module flat cable
@@ Line 20: / Line 17: @@
 | 4 || microSD™ card
 |}
-{{ReviewsComments | [[User:Ludovic Bergonzi|Ludovic Bergonzi]] ([[User talk:Ludovic Bergonzi|talk]]) 20:37, 29 March 2022 (CEST) <br /> The article shows MB1635 and MB1723 while the technical documents (data brief and user manual) show MB1635 and MB1897.
-The MCD board reference site describes the boards as:
-MB1635	Discovery board for STM32MP1 TinyWildcat.
-MB1723	Module Camera CSI FPC raspberry pi compatible.
-MB1897	Dual lane CSI camera module with 15-pin FFC connector.
-Is it possible to align both descriptions?}}
 Note that the {{Board | type=135F-DK}} delivery does not contain a USB cable or a USB charger.
@@ Line 33: / Line 23: @@
 [[File: STM32MP135x-DKx_assembled.png | thumb | upright=4 | center | link= | STM32MP135F-DK Discovery kit assembled.<br>(picture is not contractual)]]<br>
-{{ReviewsComments | [[User:Ludovic Bergonzi|Ludovic Bergonzi]] ([[User talk:Ludovic Bergonzi|talk]]) 17:34, 29 March 2022 (CEST) <br /> The picture quality is rather poor. Also, could the digits be written in a color from the ST palette such as the ST pink?<br> NSA : Picture quality will be improve. Digits in ST pink }}