STM32 MPU ecosystem v1
Log in
STM32 MPU ecosystem v1
  • Main navigation
  • Books

Getting started

Getting started
  • 1.Getting started
    • 1.1.STM32MP1 boards
      • 1.1.1.STM32MP157C-DK2
        • 1.1.1.1.Let's start
          • 1.1.1.1.1.Unpack the STM32MP157C-DK2 board
          • 1.1.1.1.2.Populate the target and boot the image
          • 1.1.1.1.3.Execute basic commands
          • 1.1.1.1.4.Use the demo launcher
        • 1.1.1.2.Develop on Arm® Cortex®-A7
          • 1.1.1.2.1.Install the SDK
          • 1.1.1.2.2.Create a simple hello-world application
          • 1.1.1.2.3.Modify, rebuild and reload the Linux® kernel
        • 1.1.1.3.Develop on Arm® Cortex®-M4
          • 1.1.1.3.1.Install the IDE
          • 1.1.1.3.2.Install STM32Cube MP1 package
          • 1.1.1.3.3.Modify, rebuild and reload a firmware
        • 1.1.1.4.What's next
      • 1.1.2.STM32MP157x-EV1
        • 1.1.2.1.Let's start
          • 1.1.2.1.1.Unpack the STM32MP157x-EV1 board
          • 1.1.2.1.2.Populate the target and boot the image
          • 1.1.2.1.3.Execute basic commands
          • 1.1.2.1.4.Use the demo launcher
        • 1.1.2.2.Develop on Arm® Cortex®-A7
          • 1.1.2.2.1.Install the SDK
          • 1.1.2.2.2.Create a simple hello-world application
          • 1.1.2.2.3.Modify, rebuild and reload the Linux® kernel
        • 1.1.2.3.Develop on Arm® Cortex®-M4
          • 1.1.2.3.1.Install the IDE
          • 1.1.2.3.2.Install STM32Cube MP1 package
          • 1.1.2.3.3.Modify, rebuild and reload a firmware
        • 1.1.2.4.What's next
Edit book
  • Welcome on ecosystem-v1
  • Getting started
  • Development zone
  • Legal notice
  • Latest wiki
Approved version. Approved on: 15:01, 27 January 2020
(Pages)
Getting started
STM32MP1 boards
STM32MP157C-DK2
Develop on Arm® Cortex®-M4
Install the IDE
  • Last edited 3 years ago ago

Install the IDE

< Getting started‎ | STM32MP1 boards‎ | STM32MP157C-DK2‎ | Develop on Arm® Cortex®-M4
STM32MP157X-DK2.png
Develop on Arm® Cortex®-M4 What's next
Step category in.png Install the IDE Step.png Install STM32Cube MP1 package Step.png Modify, rebuild and reload a firmware Step category out.png


1 Overview

This stage explains how to install STM32CubeIDE to develop on the Arm® Cortex®-M4 coprocessor of the STM32MP1.

2 Install STM32CubeIDE

  • Download last STM32CubeIDE that suits your host system and follow Installation Guide



Back button.png Overview button.png Next button.png


Retrieved from "https://wiki.st.com/stm32mpu-ecosystem-v1/index.php?title=Getting_started/STM32MP1_boards/STM32MP157C-DK2/Develop_on_Arm®_Cortex®-M4/Install_the_IDE&oldid=66814"

If you have any question or request concerning this wiki or if you see some pages with some mistake, you can report them using ST Support Center or ST Community MPU Forum.

  • All rights reserved (c) 2023 STMicroelectronics
  • Privacy Portal
  • Manage cookies
  • Terms of use
  • Article content
  • Tools
  • Quality management
  • 1 Overview
  • 2 Install STM32CubeIDE

Categories

STM32MP157C-DK2 - develop on M4