Difference between revisions of "STM32-CoPro-MPU plugin release note"

[quality revision] [quality revision]
(SW4TM32 - System Workbench for STM32 2.8.0 - STM32-CoPro-MPU plugin version 1.0.0)
 

Template:ArticleMainWriter Template:ReviewersList Template:ArticleApprovedVersion

More information can be found in the detailed release notes referenced later in this article.

SW4TM32 - System Workbench for STM32 2.89.0 - STM32-CoPro-MPU plugin version 1.0.0[edit]

The STM32-CoPro-MPU plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex®-M core contained in the STM32MP1 Family.
It is included in System Workbench for STM32 from version 2.89.0.
It provides:

  • the target status widget,
  • the console management,
  • the project creation, compilation and debug in two modes:
    • Engineering Mode,
    • Production Mode, with Cortex®-M firmware download :
      • via Ethernet Network (LAN or Point-to-Point)
      • via Ethernet over USB
  • the remote system explorer configuration


It is available on Linux® and Windows® platforms.

Upgrading your System Workbench, STM32-CoPro-MPU plugin can be installed using the System Workbench for STM32 - Updates in menu Windows > Preferences > Install/Update > Available Software Site.
The installation is then the standard Eclipse one: Help > Install New Software...

In order to access to the Ac6 site, take care to configure proxy at Eclipse level: in Windows > Preferences > General > Network Connections; Active Provider set to Manual.
Then after selecting HTTP proxy entry, click Edit... and enter your proxy setup.


IDE for Linux® host PC IDE for Windows® host PC
Download
Version 1.0.0

STM32-CoPro-MPU plugin in SW4STM32 2.

8

9.0

  • Download the all-in-one Linux installer 2.
8
  • 9 install_sw4stm32_linux_64bits-v2.
8
Version 1.0.0

STM32-CoPro-MPU plugin in SW4STM32 2.

8

9.0

  • Download the all-in-one Windows installer 2.
8
  • 9 install_sw4stm32_win_64bits-v2.
8
Installation
  • Run the installation script
$ chmod +x install_sw4stm32_linux_64bits-v2.
8
9.run
$ ./install_sw4stm32_linux_64bits-v2.
8
9.run

  • Run the installation exe
$ install_sw4stm32_win_64bits-v2.
8
9.exe

Detailed release notes Details about the content of this tool version are available on openstm32.org

Details about the content of this tool version are available on openstm32.org




<noinclude>

{{ArticleMainWriter|LudovicR}}
{{ReviewersList|To be completed by LudovicR}}
{{ArticleApprovedVersion| LudovicR | BernardP | NathalieS - 29Aug'18 | AlainF - 14Aug'18 - 8349 | 21Nov'18}}

[[Category:Release notes|5]]
[[Category:IDE]]

{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Change the version of the tool
* Change the name of the archive file
* Change the download URLs
}}</noinclude>

More information can be found in the detailed release notes referenced later in this article.

== SW4TM32 - System Workbench for STM32 2.89.0 - ''STM32-CoPro-MPU plugin version 1.0.0''==

The '''STM32-CoPro-MPU''' plugin, based onto the ''System Workbench for STM32'' (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family. <br>

It is included in '''System Workbench for STM32''' from version 2.89.0. <br>

It provides:<br>

* the target status widget, 
* the console management, 
* the project creation, compilation and debug in two modes:
** '''Engineering Mode''', 
** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
***via Ethernet Network (LAN or Point-to-Point)
***via Ethernet over USB
*the remote system explorer configuration<br>

It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
<br>


Upgrading your System Workbench, '''STM32-CoPro-MPU''' plugin can be installed using the [http://www.ac6-tools.com/Eclipse-updates/org.openstm32.system-workbench.update-site-v2/ System Workbench for STM32 - Updates] 
in menu ''Windows > Preferences > Install/Update > Available Software Site''.  <br>

The installation is then the standard Eclipse one: ''Help > Install New Software...''  <br> 
<br>

In order to access to the Ac6 site, take care to configure proxy at Eclipse level: in ''Windows > Preferences > General > Network Connections''; Active Provider set to ''Manual''. <br>

Then after selecting ''HTTP'' proxy entry, click ''Edit...'' and enter your proxy setup.
<onlyinclude>

{| class="wikitablest-table" width=98%
|-
!  !! style="text-align:center;"|IDE for Linux<sup>&reg;</sup> host PC!!style="text-align:center;"| IDE for Windows<sup>&reg;</sup> host PC
|-
| '''Download''' 
|| 
'''Version 1.0.0STM32-CoPro-MPU plugin in SW4STM32 2.89.0 '''
*Download the all-in-one Linux installer 2.89 '''install_sw4stm32_linux_64bits-v2.89.run''' from [http://www.openstm32.org/HomePage openstm32.org]
|| 
'''Version 1.0.0STM32-CoPro-MPU plugin in SW4STM32 2.89.0 '''
*Download the all-in-one Windows installer 2.89 '''install_sw4stm32_win_64bits-v2.89.exe''' from [http://www.openstm32.org/HomePage openstm32.org]
|-
| '''Installation''' 
|| 
* Run the installation script
 $ chmod +x install_sw4stm32_linux_64bits-v2.89.run
 $ ./install_sw4stm32_linux_64bits-v2.89.run
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
||
* Run the installation exe
 $ install_sw4stm32_win_64bits-v2.89.exe
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
|-
| '''Detailed release notes''' 
||Details about the content of this tool version are available on [http://www.openstm32.org/HomePage openstm32.org]
||
Details about the content of this tool version are available on [http://www.openstm32.org/HomePage openstm32.org]
|}</onlyinclude>

<noinclude>

{{PublicationRequestId | 8349 | 2018-08-14 | AlainF}}
[[Category:Release notes|5]]
[[Category:SW4STM32 IDE]]

{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Change the version of the tool
* Change the name of the archive file
* Change the download URLs
}}</noinclude>
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<noinclude>
 
{{ArticleMainWriter|LudovicR}}
 
{{ReviewersList|To be completed by LudovicR}}
 
{{ArticleApprovedVersion| LudovicR | BernardP | NathalieS - 29Aug'18 | AlainF - 14Aug'18 - 8349 | 21Nov'18}}
 
 
[[Category:Release notes|5]]
 
[[Category:IDE]]
 
 
{{UpdateNeededForNewRelease|
 
* Copy the current release (first chapter) in the "Archives" chapter
 
* Change the version of the tool
 
* Change the name of the archive file
 
* Change the download URLs
 
}}
 
</noinclude>
 
 
 
 
More information can be found in the detailed release notes referenced later in this article.
 
More information can be found in the detailed release notes referenced later in this article.
   
== SW4TM32 - System Workbench for STM32 2.8.0 - ''STM32-CoPro-MPU plugin version 1.0.0''==
+
== SW4TM32 - System Workbench for STM32 2.9.0 - ''STM32-CoPro-MPU plugin''==
   
 
The '''STM32-CoPro-MPU''' plugin, based onto the ''System Workbench for STM32'' (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family. <br>
 
The '''STM32-CoPro-MPU''' plugin, based onto the ''System Workbench for STM32'' (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family. <br>
It is included in '''System Workbench for STM32''' from version 2.8.0. <br>
+
It is included in '''System Workbench for STM32''' from version 2.9.0. <br>
 
It provides:<br>
 
It provides:<br>
 
* the target status widget,  
 
* the target status widget,  
Line 43: Line 26:
   
 
<onlyinclude>
 
<onlyinclude>
{| class="wikitable" width=98%
+
{| class="st-table" width=98%
 
|-
 
|-
!  !! IDE for Linux<sup>&reg;</sup> host PC!! IDE for Windows<sup>&reg;</sup> host PC
+
!  !! style="text-align:center;"|IDE for Linux<sup>&reg;</sup> host PC!!style="text-align:center;"| IDE for Windows<sup>&reg;</sup> host PC
 
|-
 
|-
 
| '''Download'''  
 
| '''Download'''  
 
||  
 
||  
'''Version 1.0.0 in SW4STM32 2.8.0 '''
+
'''STM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
*Download the all-in-one Linux installer 2.8 '''install_sw4stm32_linux_64bits-v2.8.run''' from [http://www.openstm32.org/HomePage openstm32.org]
+
*Download the all-in-one Linux installer 2.9 '''install_sw4stm32_linux_64bits-v2.9.run''' from [http://www.openstm32.org/HomePage openstm32.org]
 
||  
 
||  
'''Version 1.0.0 in SW4STM32 2.8.0 '''
+
'''STM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
*Download the all-in-one Windows installer 2.8 '''install_sw4stm32_win_64bits-v2.8.exe''' from [http://www.openstm32.org/HomePage openstm32.org]
+
*Download the all-in-one Windows installer 2.9 '''install_sw4stm32_win_64bits-v2.9.exe''' from [http://www.openstm32.org/HomePage openstm32.org]
 
|-
 
|-
 
| '''Installation'''  
 
| '''Installation'''  
 
||  
 
||  
 
* Run the installation script
 
* Run the installation script
  $ chmod +x install_sw4stm32_linux_64bits-v2.8.run
+
  $ chmod +x install_sw4stm32_linux_64bits-v2.9.run
  $ ./install_sw4stm32_linux_64bits-v2.8.run
+
  $ ./install_sw4stm32_linux_64bits-v2.9.run
 
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
 
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
 
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
 
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
 
||
 
||
 
* Run the installation exe
 
* Run the installation exe
  $ install_sw4stm32_win_64bits-v2.8.exe
+
  $ install_sw4stm32_win_64bits-v2.9.exe
 
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
 
*Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
 
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
 
* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
Line 76: Line 59:
   
 
<noinclude>
 
<noinclude>
  +
{{PublicationRequestId | 8349 | 2018-08-14 | AlainF}}
  +
[[Category:Release notes|5]]
  +
[[Category:SW4STM32 IDE]]
  +
  +
{{UpdateNeededForNewRelease|
  +
* Copy the current release (first chapter) in the "Archives" chapter
  +
* Change the version of the tool
  +
* Change the name of the archive file
  +
* Change the download URLs
  +
}}
  +
</noinclude>

Attachments

Discussions