Difference between revisions of "STM32-CoPro-MPU plugin release note"

[quality revision] [quality revision]
m
 
 

Template:ArticleMainWriter Template:ReviewersList Template:ArticleApprovedVersion

More information can be found in the detailed release notes referenced later in this article.

1 Eclipse IDE : SW4TM32 - System Workbench for STM32 2.9.0 - STM32-CoPro-MPU plugin - version 0.4.9[edit]

The STM32-CoPro-MPU plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex®-M core contained in the STM32MP1 Family.
It is included in System Workbench for STM32 from version 2.9.0.
It provides:

  • the target status widget,
  • the console management,
  • the project creation, compilation and debug in two modes:
    • Engineering Mode,
    • Production Mode, with Cortex®-M firmware download :
      • via Ethernet
      • or serial link (on Linux® host only)
      • Network (LAN or Point-to-Point)
      • via Ethernet over USB
  • the remote system explorer configuration


It is available on Linux® and Windows® platforms.

IDE for Linux® host PC IDE for Windows® host PC Download

Version 0.4.9

Template:STdotcomInfo

Version 0.4.9

Template:STdotcomInfo

Installation
  • Uncompress the archive file to get IDE:


$ unzip

Upgrading your System Workbench, STM32-CoPro-MPU

_Full_Install_linux64_0.4.9.zip
  • Then follow instructions given in the detailed release note to finalize the installation
  • When the installation is over, to use the tool, you can follow instruction given in STM32-CoPro-MPU plugin for SW4STM32 or in the detailed release note.
  • Uncompress the archive file to get IDE:
$ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip

  • Then follow instructions given in the detailed release note to finalize the installation
  • When the installation is over, to use the tool, you can follow instruction given in STM32-CoPro-MPU plugin for SW4STM32 or in the detailed release note.
Detailed release notes Details about the content of this tool version are available in the <System Workbench for STM32 installation directory>/README.htm file
  • If you are interested in former releases, please go through the archives

Details about the content of this tool version are available in the <System Workbench for STM32 installation directory>/README.htm file

2 Archives[edit]

2.1 Eclipse IDE : STM32-CoPro-MPU plugin - version 0.4.8[edit]

The STM32-CoPro-MPU plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex®-M core contained in the STM32MP1 Family.
It provides:

  • the target status widget,
  • the console management,
  • the project creation, compilation and debug in two modes:
    • Engineering Mode,
    • Production Mode, with Cortex®-M firmware download :
      • via Ethernet
      • or serial link (on Linux® host only)
  • the remote system explorer configuration

It is available on Linux® and Windows® platforms plugin can be installed using the System Workbench for STM32 - Updates in menu Windows > Preferences > Install/Update > Available Software Site.
The installation is then the standard Eclipse one: Help > Install New Software...

In order to access to the Ac6 site, take care to configure proxy at Eclipse level: in Windows > Preferences > General > Network Connections; Active Provider set to Manual.
Then after selecting HTTP proxy entry, click Edit... and enter your proxy setup.


IDE for Linux® host PC IDE for Windows® host PC
Download

Version 0.4.8

Template:STdotcomInfo

Version 0.4.8

Template:STdotcomInfo

Installation
  • Uncompress the archive file to get IDE:
$ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip

  • Then follow instructions given in the detailed release note to finalize the installation
  • When the installation is over, to use the tool, you can follow instruction given in

    STM32-CoPro-MPU plugin in SW4STM32 2.9.0

    • Download the all-in-one Linux installer 2.9 install_sw4stm32_linux_64bits-v2.9.run from openstm32.org

    STM32-CoPro-MPU plugin

    for SW4STM32 or in the detailed release note.
    • Uncompress the archive file to get IDE:
    $ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip

    in SW4STM32 2.9.0

    • Download the all-in-one Windows installer 2.9 install_sw4stm32_win_64bits-v2.9.exe from openstm32.org
    Installation
    • Run the installation script
    $ chmod +x install_sw4stm32_linux_64bits-v2.9.run
    $ ./install_sw4stm32_linux_64bits-v2.9.run
    
    
    • Then follow instructions given
    in the detailed release note to finalize the installation
    Detailed release notes Details about the content of this tool version are available in the <System Workbench for STM32 installation directory>/README.htm file
    • If you are interested in former releases, please go through the archives

    Details about the content of this tool version are available in the <System Workbench for STM32 installation directory>/README.htm file

    2.2 Eclipse IDE - version 0.4.1[edit]

    IDE for Linux host PC IDE for Windows host PC Download

    Version 0.4.1

    Template:STdotcomInfo

    No version available yet for Windows

    Installation
    • Uncompress the archive file to get IDE:
    $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip
    • Run the installation exe
    $ install_sw4stm32_win_64bits-v2.9.exe
    
    
    • Then follow instructions given
    in the detailed release note to finalize the installation

    No version available yet for Windows

    Detailed release notes Details about the content of this tool version are available
    in the <System Workbench for STM32 installation directory>/README.htm file
    • If you are interested in former releases, please go through the archives
    No version available yet for Windows
    on openstm32.org

    Details about the content of this tool version are available on openstm32.org




    <noinclude>
    
    {{ArticleMainWriter|LudovicR}}
    {{ReviewersList|To be completed by LudovicR}}
    {{ArticleApprovedVersion| LudovicR | BernardP | NathalieS - 29Aug'18 | AlainF - 14Aug'18 - 8349 | 21Nov'18}}
    
    [[Category:Release notes|5]]
    [[Category:IDE]]
    
    {{UpdateNeededForNewRelease|
    * Copy the current release (first chapter) in the "Archives" chapter
    * Change the version of the tool
    * Change the name of the archive file
    * Change the download URLs
    }}</noinclude>
    
    More information can be found in the detailed release notes referenced later in this article.
    
    ==Eclipse IDE : STM32-CoPro-MPU plugin - version 0.4.9  SW4TM32 - System Workbench for STM32 2.9.0 - ''STM32-CoPro-MPU plugin''==
    
    The '''STM32-CoPro-MPU''' plugin, based onto the ''System Workbench for STM32'' (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family. <br>
    
    It is included in '''System Workbench for STM32''' from version 2.9.0. <br>
    
    It provides:<br>
    
    * the target status widget, 
    * the console management, 
    * the project creation, compilation and debug in two modes:
    ** '''Engineering Mode''', 
    ** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
    ***via Ethernet 
    
    ***or serial link (on Linux<sup>&reg;</sup> host only)
    * Network (LAN or Point-to-Point)
    ***via Ethernet over USB
    *the remote system explorer configuration<br>
    
    It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
    <br>
    <onlyinclude>
    
    {| class="wikitable" width=98%
    |-
    !  !! IDE for Linux<sup>&reg;</sup> host PC!! IDE for Windows<sup>&reg;</sup> host PC
    |-
    | '''Download''' 
    || 
    '''Version 0.4.9 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.9/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    }}
    {{STdotcomInfo|
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
    *You need to be logged on ''my.st.com'' before accessing the following links
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z01]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z02 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z02]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z03 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z03]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z04 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z04]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.zip]
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    * Merge the 5 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip)<pre>
    
    $ cat STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.* > single.zip
    $ unzip -FF single.zip</pre>
    
    }}
    || 
    '''Version 0.4.9 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.9/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    }}
    {{STdotcomInfo|
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
    *You need to be logged on ''my.st.com'' before accessing the following links
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z01 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z01]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z02 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z02]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z03 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z03]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.zip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.zip]
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    * Merge the 4 archive files into a single one (STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip)<pre>
    
    $ cat STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.* > single.zip
    $ unzip -FF single.zip</pre>
    
    }}
    |-
    | '''Installation''' 
    || 
    * Uncompress the archive file to get IDE:
     $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
    ||
    * Uncompress the archive file to get IDE:
     $ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
    |-
    | '''Detailed release notes''' 
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]
    ||
    Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    |}</onlyinclude>
    
    <noinclude>
    
    
    ==Archives==
    ===Eclipse IDE : STM32-CoPro-MPU plugin - version 0.4.8 ===
    The '''STM32-CoPro-MPU''' plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family.<br>
    
    It provides:<br>
    
    * the target status widget, 
    * the console management, 
    * the project creation, compilation and debug in two modes:
    ** '''Engineering Mode''', 
    ** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
    ***via Ethernet 
    ***or serial link (on Linux<sup>&reg;</sup> host only)
    * the remote system explorer configuration<br>
    
    It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
    <br>
    
    
    {| class="wikitable" width=98%
    |-
    !  !! 
    
    Upgrading your System Workbench, '''STM32-CoPro-MPU''' plugin can be installed using the [http://www.ac6-tools.com/Eclipse-updates/org.openstm32.system-workbench.update-site-v2/ System Workbench for STM32 - Updates] 
    in menu ''Windows > Preferences > Install/Update > Available Software Site''.  <br>
    
    The installation is then the standard Eclipse one: ''Help > Install New Software...''  <br> 
    <br>
    
    In order to access to the Ac6 site, take care to configure proxy at Eclipse level: in ''Windows > Preferences > General > Network Connections''; Active Provider set to ''Manual''. <br>
    
    Then after selecting ''HTTP'' proxy entry, click ''Edit...'' and enter your proxy setup.
    <onlyinclude>
    
    {| class="st-table" width=98%
    |-
    !  !! style="text-align:center;"|IDE for Linux<sup>&reg;</sup> host PC!!style="text-align:center;"| IDE for Windows<sup>&reg;</sup> host PC
    |-
    | '''Download''' 
    || 
    '''Version 0.4.8 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.8/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    }}
    {{STdotcomInfo|
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
    *You need to be logged on ''my.st.com'' before accessing the following links
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.z01]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip]
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip)<pre>
    
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip --out single.zip
    $ unzip single.zip</pre>
    
    }}
    || 
    '''Version 0.4.8 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.8/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    }}
    {{STdotcomInfo|
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
    *You need to be logged on ''my.st.com'' before accessing the following links
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.z01 STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.z01]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip]
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip)<pre>
    
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip --out single.zip
    $ unzip single.zip</pre>
    
    }}
    |-
    | '''Installation''' 
    || 
    * Uncompress the archive file to get IDE:
     $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zipSTM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
    *Download the all-in-one Linux installer 2.9 '''install_sw4stm32_linux_64bits-v2.9.run''' from [http://www.openstm32.org/HomePage openstm32.org]
    || 
    '''STM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
    *Download the all-in-one Windows installer 2.9 '''install_sw4stm32_win_64bits-v2.9.exe''' from [http://www.openstm32.org/HomePage openstm32.org]
    |-
    | '''Installation''' 
    || 
    * Run the installation script
     $ chmod +x install_sw4stm32_linux_64bits-v2.9.run
     $ ./install_sw4stm32_linux_64bits-v2.9.run
    
    *Then follow instructions given in the detailed release note '''to finalize the installation'''on [http://www.openstm32.org/HomePage openstm32.org]* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
    ||
    * UncompressRun the archive file to get IDE:
     $ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zipinstallation exe
     $ install_sw4stm32_win_64bits-v2.9.exe
    
    *Then follow instructions given in the detailed release note '''to finalize the installation'''on [http://www.openstm32.org/HomePage openstm32.org]* '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
    |-
    | '''Detailed release notes''' 
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]on [http://www.openstm32.org/HomePage openstm32.org]
    
    ||
    Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    |}
    
    ===Eclipse IDE - version 0.4.1===
    
    {| class="wikitable"
    |-
    !  !! IDE for Linux host PC!! IDE for Windows host PC
    |-
    | '''Download''' 
    || 
    '''Version 0.4.1 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.1/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    }}
    {{STdotcomInfo|
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
    *You need to be logged on ''my.st.com'' before accessing the following links
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.1.z01]<br>
    
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip]
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip)<pre>
    
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip --out single.zip
    $ unzip single.zip
    $ mv single.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip</pre>
    
    }}
    || 
    No version available yet for Windows
    |-
    | '''Installation''' 
    || 
    * Uncompress the archive file to get IDE:
     $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip
    {{ReviewsComments | E Combette 22/10/18: if we do not read the next table line we get lost to find the file detailed release note
    to setup systemworkbench.
    Please say here that  detailed release note is README.htm}}
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note. 
    ||
    No version available yet for Windows
    |-
    | '''Detailed release notes''' 
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]
    ||
    No version available yet for Windows
    |}
    on [http://www.openstm32.org/HomePage openstm32.org]
    |}</onlyinclude>
    
    <noinclude>
    
    {{PublicationRequestId | 8349 | 2018-08-14 | AlainF}}
    [[Category:Release notes|5]]
    [[Category:SW4STM32 IDE]]
    
    {{UpdateNeededForNewRelease|
    * Copy the current release (first chapter) in the "Archives" chapter
    * Change the version of the tool
    * Change the name of the archive file
    * Change the download URLs
    }}</noinclude>
    (15 intermediate revisions by 6 users not shown)
    Line 1: Line 1:
    <noinclude>
     
    {{ArticleMainWriter|LudovicR}}
     
    {{ReviewersList|To be completed by LudovicR}}
     
    {{ArticleApprovedVersion| LudovicR | BernardP | NathalieS - 29Aug'18 | AlainF - 14Aug'18 - 8349 | 21Nov'18}}
     
     
    [[Category:Release notes|5]]
     
    [[Category:IDE]]
     
     
    {{UpdateNeededForNewRelease|
     
    * Copy the current release (first chapter) in the "Archives" chapter
     
    * Change the version of the tool
     
    * Change the name of the archive file
     
    * Change the download URLs
     
    }}
     
    </noinclude>
     
     
     
     
    More information can be found in the detailed release notes referenced later in this article.
     
    More information can be found in the detailed release notes referenced later in this article.
       
    ==Eclipse IDE : STM32-CoPro-MPU plugin - version 0.4.9 ==
    +
    == SW4TM32 - System Workbench for STM32 2.9.0 - ''STM32-CoPro-MPU plugin''==
       
    The '''STM32-CoPro-MPU''' plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family.<br>
    +
    The '''STM32-CoPro-MPU''' plugin, based onto the ''System Workbench for STM32'' (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family. <br>
      +
    It is included in '''System Workbench for STM32''' from version 2.9.0. <br>
     
    It provides:<br>
     
    It provides:<br>
     
    * the target status widget,  
     
    * the target status widget,  
    Line 27: Line 11:
     
    ** '''Engineering Mode''',  
     
    ** '''Engineering Mode''',  
     
    ** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
     
    ** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
    ***via Ethernet  
    +
    ***via Ethernet Network (LAN or Point-to-Point)
    ***or serial link (on Linux<sup>&reg;</sup> host only)
    +
    ***via Ethernet over USB
    * the remote system explorer configuration
    +
    *the remote system explorer configuration
     
    <br>
     
    <br>
     
    It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
     
    It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
     
    <br>
     
    <br>
      +
      +
    Upgrading your System Workbench, '''STM32-CoPro-MPU''' plugin can be installed using the [http://www.ac6-tools.com/Eclipse-updates/org.openstm32.system-workbench.update-site-v2/ System Workbench for STM32 - Updates]
      +
    in menu ''Windows > Preferences > Install/Update > Available Software Site''.  <br>
      +
    The installation is then the standard Eclipse one: ''Help > Install New Software...''  <br>
      +
    <br>
      +
    In order to access to the Ac6 site, take care to configure proxy at Eclipse level: in ''Windows > Preferences > General > Network Connections''; Active Provider set to ''Manual''. <br>
      +
    Then after selecting ''HTTP'' proxy entry, click ''Edit...'' and enter your proxy setup.
      +
     
    <onlyinclude>
     
    <onlyinclude>
    {| class="wikitable" width=98%
    +
    {| class="st-table" width=98%
     
    |-
     
    |-
    !  !! IDE for Linux<sup>&reg;</sup> host PC!! IDE for Windows<sup>&reg;</sup> host PC
    +
    !  !! style="text-align:center;"|IDE for Linux<sup>&reg;</sup> host PC!!style="text-align:center;"| IDE for Windows<sup>&reg;</sup> host PC
     
    |-
     
    |-
     
    | '''Download'''  
     
    | '''Download'''  
     
    ||  
     
    ||  
    '''Version 0.4.9 '''
    +
    '''STM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.9/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip]
    +
    *Download the all-in-one Linux installer 2.9 '''install_sw4stm32_linux_64bits-v2.9.run''' from [http://www.openstm32.org/HomePage openstm32.org]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    }}
     
    {{STdotcomInfo|
     
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
     
    *You need to be logged on ''my.st.com'' before accessing the following links
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z01]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z02 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z02]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z03 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z03]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z04 STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.z04]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.zip]
     
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    * Merge the 5 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip)
     
    <pre>
     
    $ cat STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip.* > single.zip
     
    $ unzip -FF single.zip
     
    </pre>
     
    }}
     
     
    ||  
     
    ||  
    '''Version 0.4.9 '''
    +
    '''STM32-CoPro-MPU plugin in SW4STM32 2.9.0 '''
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.9/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip]
    +
    *Download the all-in-one Windows installer 2.9 '''install_sw4stm32_win_64bits-v2.9.exe''' from [http://www.openstm32.org/HomePage openstm32.org]
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    }}
     
    {{STdotcomInfo|
     
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
     
    *You need to be logged on ''my.st.com'' before accessing the following links
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z01 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z01]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z02 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z02]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z03 STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.z03]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.zip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.zip]
     
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    * Merge the 4 archive files into a single one (STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip)
     
    <pre>
     
    $ cat STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip.* > single.zip
     
    $ unzip -FF single.zip
     
    </pre>
     
    }}
     
     
    |-
     
    |-
     
    | '''Installation'''  
     
    | '''Installation'''  
     
    ||  
     
    ||  
    * Uncompress the archive file to get IDE:
    +
    * Run the installation script
      $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.9.zip
    +
      $ chmod +x install_sw4stm32_linux_64bits-v2.9.run
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
    +
    $ ./install_sw4stm32_linux_64bits-v2.9.run
      +
    *Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
     
    ||
     
    ||
    * Uncompress the archive file to get IDE:
    +
    * Run the installation exe
      $ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.9.zip
    +
      $ install_sw4stm32_win_64bits-v2.9.exe
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
    +
    *Then follow instructions given on [http://www.openstm32.org/HomePage openstm32.org]
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.  
     
    |-
     
    |-
     
    | '''Detailed release notes'''  
     
    | '''Detailed release notes'''  
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    +
    ||Details about the content of this tool version are available on [http://www.openstm32.org/HomePage openstm32.org]
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]
     
     
    ||
     
    ||
    Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
    +
    Details about the content of this tool version are available on [http://www.openstm32.org/HomePage openstm32.org]
     
    |}
     
    |}
     
    </onlyinclude>
     
    </onlyinclude>
       
     
    <noinclude>
     
    <noinclude>
      +
    {{PublicationRequestId | 8349 | 2018-08-14 | AlainF}}
      +
    [[Category:Release notes|5]]
      +
    [[Category:SW4STM32 IDE]]
       
    ==Archives==
    +
    {{UpdateNeededForNewRelease|
    ===Eclipse IDE : STM32-CoPro-MPU plugin - version 0.4.8 ===
    +
    * Copy the current release (first chapter) in the "Archives" chapter
    The '''STM32-CoPro-MPU''' plugin, based onto the System Workbench for STM32 (SW4STM32), targets the support of Cortex<sup>&reg;</sup>-M core contained in the STM32MP1 Family.<br>
    +
    * Change the version of the tool
    It provides:<br>
    +
    * Change the name of the archive file
    * the target status widget,
    +
    * Change the download URLs
    * the console management,
     
    * the project creation, compilation and debug in two modes:
     
    ** '''Engineering Mode''',
     
    ** '''Production Mode''', with Cortex<sup>&reg;</sup>-M firmware download :
     
    ***via Ethernet
     
    ***or serial link (on Linux<sup>&reg;</sup> host only)
     
    * the remote system explorer configuration
     
    <br>
     
    It is available on Linux<sup>&reg;</sup> and Windows<sup>&reg;</sup> platforms. <br>
     
    <br>
     
     
     
    {| class="wikitable" width=98%
     
    |-
     
    !  !! IDE for Linux<sup>&reg;</sup> host PC!! IDE for Windows<sup>&reg;</sup> host PC
     
    |-
     
    | '''Download'''
     
    ||
     
    '''Version 0.4.8 '''
     
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.8/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip]
     
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    }}
     
    {{STdotcomInfo|
     
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
     
    *You need to be logged on ''my.st.com'' before accessing the following links
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.z01]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip]
     
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip)
     
    <pre>
     
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip.zip --out single.zip
     
    $ unzip single.zip
     
    </pre>
     
    }}
     
    ||
     
    '''Version 0.4.8 '''
     
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.8/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip]
     
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    }}
     
    {{STdotcomInfo|
     
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
     
    *You need to be logged on ''my.st.com'' before accessing the following links
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.z01 STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.z01]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip]
     
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip)
     
    <pre>
     
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip.zip --out single.zip
     
    $ unzip single.zip
     
    </pre>
     
    }}
     
    |-
     
    | '''Installation'''
     
    ||
     
    * Uncompress the archive file to get IDE:
     
    $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.8.zip
     
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.
     
    ||
     
    * Uncompress the archive file to get IDE:
     
    $ unzip STM32-CoPro-MPU_Full_Install_win64_0.4.8.zip
     
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.
     
    |-
     
    | '''Detailed release notes'''
     
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
     
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]
     
    ||
     
    Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
     
    |}
     
     
     
     
     
    ===Eclipse IDE - version 0.4.1===
     
     
     
    {| class="wikitable"
     
    |-
     
    !  !! IDE for Linux host PC!! IDE for Windows host PC
     
    |-
     
    | '''Download'''
     
    ||
     
    '''Version 0.4.1 '''
     
    {{InternalInfo|[https://citools.st.com/snapshots/artifactory/snapshots-stm32ide-codex-st-com/mpu/0.4.1/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip]
     
    * Download the archive file in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    }}
     
    {{STdotcomInfo|
     
    *'''A ''my.st.com'' account is required, with specific access rights: please request these rights to your ST support contact'''
     
    *You need to be logged on ''my.st.com'' before accessing the following links
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.z01 STM32-CoPro-MPU_Full_Install_linux64_0.4.1.z01]<br>
     
    :[https://my.st.com/collab/g1/stm32mp1/Common_library/Tools/STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip]
     
    * Download these archive files in in your host PC working directory: see [[Example of directory structure for tools|a proposition to organize the tools' directory]]
     
    * Merge the 2 archive files into a single one (STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip)
     
    <pre>
     
    $ zip -s 0 STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip --out single.zip
     
    $ unzip single.zip
     
    $ mv single.zip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip
     
    </pre>
     
     
    }}
     
    }}
    ||
     
    No version available yet for Windows
     
    |-
     
    | '''Installation'''
     
    ||
     
    * Uncompress the archive file to get IDE:
     
    $ unzip STM32-CoPro-MPU_Full_Install_linux64_0.4.1.zip
     
    {{ReviewsComments | E Combette 22/10/18: if we do not read the next table line we get lost to find the file detailed release note
     
    to setup systemworkbench.
     
    Please say here that  detailed release note is README.htm}}
     
    *Then follow instructions given in the detailed release note '''to finalize the installation'''
     
    * '''When the installation is over''', to use the tool, you can follow instruction given in [[STM32-CoPro-MPU plugin for SW4STM32]] or in the detailed release note.
     
    ||
     
    No version available yet for Windows
     
    |-
     
    | '''Detailed release notes'''
     
    ||Details about the content of this tool version are available in the ''''' <System Workbench for STM32 installation directory>/README.htm''''' file
     
    * If you are interested in former releases, please go through the [[STM32MP15 ecosystem release note#Archives| archives]]
     
    ||
     
    No version available yet for Windows
     
    |}
     
     
     
    </noinclude>
     
    </noinclude>

    Attachments

    Discussions