Original file (609 × 800 pixels, file size: 151 KB, MIME type: image/jpeg)
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 18:00, 27 November 2023 | | 609 × 800 (151 KB) | Registered User |
You cannot overwrite this file.
The following page uses this file:
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.
| Camera manufacturer | Canon |
|---|---|
| Camera model | Canon PowerShot G10 |
| Exposure time | 1/50 sec (0.02) |
| F Number | f/2.8 |
| ISO speed rating | 200 |
| Date and time of data generation | 17:34, 27 November 2023 |
| Lens focal length | 6.1 mm |
| Orientation | Normal |
| Horizontal resolution | 180 dpi |
| Vertical resolution | 180 dpi |
| Software used | GIMP 2.10.18 |
| File change date and time | 16:54, 27 November 2023 |
| Y and C positioning | Co-sited |
| Exif version | 2.21 |
| Date and time of digitizing | 17:34, 27 November 2023 |
| Meaning of each component |
|
| Image compression mode | 5 |
| APEX shutter speed | 5.65625 |
| APEX aperture | 2.96875 |
| APEX exposure bias | 0 |
| Maximum land aperture | 2.96875 APEX (f/2.8) |
| Metering mode | Pattern |
| Flash | Flash did not fire, compulsory flash suppression |
| Supported Flashpix version | 1 |
| Color space | sRGB |
| Focal plane X resolution | 15,123.287671233 |
| Focal plane Y resolution | 15,123.287671233 |
| Focal plane resolution unit | inches |
| Sensing method | One-chip color area sensor |
| File source | Digital still camera |
| Custom image processing | Normal process |
| Exposure mode | Auto exposure |
| White balance | Auto white balance |
| Digital zoom ratio | 1 |
| Scene capture type | Standard |
If you have any question or request concerning this wiki or if you see some pages with some mistake, you can report them using ST Support Center or ST Community MPU Forum.
