STM32 MPU OpenSTLinux release note/Changes notification: Difference between revisions

This message will disappear after all relevant tasks have been resolved.

Semantic MediaWiki

There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

VisualWikitext

Latest revision as of 16:58, 18 November 2022↑

Applicable for

STM32MP13x lines, STM32MP15x lines

1. Article purpose[edit source]↑

The article aims to help rebase an STM32 MPU project on a new ecosystem release by focusing on the impacts of the main changes.

2. Scope of this article[edit source]↑

This article provides some details for the main changes between STM32 MPU ecosystem release v4.0.0 and new STM32 MPU ecosystem release v4.1.0 . The aim is to help migrate your project.

All Information about the features delivered in the new release is also available in the OpenSTLinux release note.

Important

In case of upgrade from OpenSTLinux ecosystem release v3, check first the previous release change notification listed below:

STM32 MPU OpenSTLinux release changes notification – v4.0.0

3. Impacted domains[edit source]↑

3.1. Yocto build environment for Distribution Package[edit source]↑

None

3.2. Hardware configuration[edit source]↑

Check the device tree files for the STMP32 MPU board:

Linux^® kernel: between Linux kernel v5.15-stm32mp-r2 (v5.15.67) and previous Linux kernel v5.15-stm32mp-r1 (v5.15.24)

IIO consumer binding and channels configuration update. Links and examples updated in ADC device tree configuration example

U-Boot: between U-Boot v2021.10-stm32mp-r2 and previous U-Boot v2021.10-stm32mp-r1

None

OP-TEE: between OP-TEE 3.16.0-stm32mp-r2 and previous OP-TEE 3.16.0-stm32mp-r1

None

TF-A: between TF-A v2.6-stm32mp-r2 and previous TF-A v2.6-stm32mp-r1

Chain of Trust (COT) binding update. Links updated in TF-A_BL2_Chain of trust implementation

Information

This is possible with git diff command to get delta between two branches in the same repository.
Example with STLINUX GitHub repository and for all STM32MP1 device tree files:

git diff v5.10-stm32mp-r2 v5.15-stm32mp-r1 -- arch/arm/boot/dts/stm32mp1*

3.3. System configuration[edit source]↑

FIP only has been supported since the STM32 MPU ecosystem release v4.0.0 . NoFIP is no more supported.

3.4. Boot stages[edit source]↑

None

3.5. Security[edit source]↑

None

3.6. User space and applications[edit source]↑

None

@@ Line 5: / Line 5: @@
 [[File:BackToNavigationTree button.png|300px|link=STM32_MPU_OpenSTLinux_release_note]]
-{{:STM32_MPU_OpenSTLinux_release_note_-_v4.0.0/Changes_notification_–_v4.0.0}}
+{{:STM32_MPU_OpenSTLinux_release_note_-_v4.1.0/Changes_notification_–_v4.1.0}}
 <noinclude>