Difference between revisions of "STM32MP1 Developer Package - U-Boot"

[quality revision] [quality revision]
m
 
 


Template:ArticleMainWriter Template:ReviewersList Template:ArticleApprovedVersion

This article provides the following information:

  • How to download and install the latest U-Boot for the STM32 microprocessor Series used
  • Where to find the associated release note
  • Where to find the previous releases (archives)
Warning.png To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: Category:Developer Package

1 Beta1 STM32MP15-Ecosystem-v1.2.0 release[edit]

  • The STM32MP1 U-Boot is delivered through a tarball file named
    • SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz for STM32MP157C-EV1 and STM32MP157X-DKX boards revision B
    • en.SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.1420-rocko-mp1-18-11-2602-19.tar.xz for STM32MP157C-EV1 and STM32MP157X-DKX boards revision C

  • Download and install the STM32MP1 U-Boot
By downloading this

The software package is provided AS IS, and by downloading it, you agree to be bound to the terms of the

Limited License Agreement

software license agreement (SLA). The detailed content licenses can be found here.

STM32MP1 Developer Package U-Boot -
Beta1
STM32MP15-Ecosystem-v1.2.0 release
Download

Template:STdotcomInfo

You need to be logged on to my.st.com before accessing the following link
en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz

Installation
$ cd <working directory path>/Developer-Package

  • Download the tarball file in this directory
  • Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):

$ tar xvf 
SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz OR $ tar xvf
en.SOURCES-u-boot-stm32mp1-
boards-revc-
openstlinux-
4.14
20-
rocko-mp1-18-11-26
02-19.tar.xz

$ cd stm32mp1-
boards-rev[b/c]-
openstlinux-
4.14
20-
rocko-mp1-18-11-26
02-19/sources/arm-
openstlinux_weston
ostl-linux-gnueabi/u-boot-stm32mp-2018.
09-release.AUTOINC+f88b6facb8
11-r0/
$ tar xvf 
u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.
v2018.11.tar.gz

Release note

Details of the content of the U-Boot are available in the associated STM32MP15

ecosystem

OpenSTLinux release note.

Archive box.png If you are interested in

previous

older releases, please

refer to the archives of the ecosystem release note

have a look into the section Archives.

  • The U-Boot installation directory is in the <Developer Package installation directory>/stm32mp1-boards-rev[b/c]-openstlinux-4.1420-rocko-mp1-18-11-2602-19/sources/arm-openstlinux_westonostl-linux-gnueabi directory, and is named u-boot-stm32mp-<U-Boot version>-AUTOINC+<U-Boot SHA1>:
u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8             11-r0  U-Boot installation directory
├── [*].patch                                                         ST patches to apply during the U-Boot preparation (see next chapter)
├── gitu-boot-2018.11                                                               U-Boot source code directory
├── Makefile.sdk                                                      Makefile for the U-Boot compilation
├── README.HOW_TO.txt                                                 Helper file for U-Boot management: reference for U-Boot build
├── series                                                            List of all ST patches to apply
└── u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.v2018.11.tar.gz          Tarball file of the U-Boot source code


2 Archives Archive box.png[edit]

2.1

Alpha2

STM32MP15-Ecosystem-v1.1.0 release[edit]

  • The STM32MP1 U-Boot is delivered through a tarball file named
    • en.SOURCES-u-boot-openstlinux-4.
14
    • 19-
rocko
    • thud-mp1-
18
    • 19-
07
    • 10-
03
    • 09.tar.xz
.
    • for STM32MP157C-EV1 and STM32MP157X-DKX boards

  • Download and install the STM32MP1 U-Boot
By downloading
the tarball file
this software package, you agree to be bound to the terms of the
Limited License Agreement
software license agreement (SLA). The detailed content licenses can be found here
STM32MP1 Developer Package U-Boot -
Alpha2
STM32MP15-Ecosystem-v1.1.0 release
Download

Template:STdotcomInfo

You need to be logged on to my.st.com before accessing the following link
en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz

Installation
$ cd <working directory path>/Developer-Package

  • Download the tarball file in this directory
  • Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.
14
19-
rocko
thud-mp1-
18
19-
07
10-
03
09.tar.xz

$ cd stm32mp1-openstlinux-4.
14
19-
rocko
thud-mp1-
18
19-
07
10-
03
09/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-
trusted-
stm32mp-2018.
03-release.AUTOINC+f95ab1fb6e
11-r0/
$ tar xvf 
u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.
v2018.11.tar.gz

Release note

Details of the content of the U-Boot are available in the associated STM32MP15

ecosystem

OpenSTLinux release note.

Archive box.png If you are interested in

previous

older releases, please

refer to the archives of the ecosystem release note

have a look into the section Archives.

  • The U-Boot installation directory is in the <Developer Package installation directory>/stm32mp1-openstlinux-4.
14
  • 19-
rocko
  • thud-mp1-
18
  • 19-
07
  • 10-
03
  • 09/sources/arm-openstlinux_weston-linux-gnueabi directory, and is named u-boot-
trusted-
  • stm32mp-<U-Boot version>
-AUTOINC+<U-Boot SHA1>
  • :
u-boot-
trusted-
stm32mp-2018.
03-release.AUTOINC+f95ab1fb6e
11-r0  U-Boot installation directory
├── [*].patch              
ST patches to apply during the U-Boot preparation (see next chapter)
├── 
git
u-boot-2018.11         
U-Boot source code directory
├── Makefile.sdk           
Makefile for the U-Boot compilation
├── README.HOW_TO.txt      
Helper file for U-Boot management: reference for U-Boot build
├── series                 
List of all ST patches to apply
└── 
u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.
v2018.11.tar.gz        Tarball file of the U-Boot source code

2.2

Alpha1

STM32MP15-Ecosystem-v1.0.0 release[edit]

  • The STM32MP1 U-Boot is delivered through a tarball file named
    • en.SOURCES-u-boot-openstlinux-4.
14
    • 19-
rocko
    • thud-mp1-
18
    • 19-
01
    • 02-
23
    • 20.tar.xz
.
    • for STM32MP157C-EV1 and STM32MP157X-DKX boards

  • Download and install the STM32MP1 U-Boot
By downloading
the tarball file
this software package, you agree to be bound to the terms of the
Limited License Agreement
software license agreement (SLA). The detailed content licenses can be found here
STM32MP1 Developer Package U-Boot -
Alpha1
STM32MP15-Ecosystem-v1.0.0 release
Download

Template:STdotcomInfo

You need to be logged on to my.st.com before accessing the following link
en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz

Installation
$ cd <working directory path>/Developer-Package

  • Download the tarball file in this directory
  • Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.
14
19-
rocko
thud-mp1-
18
19-
01
02-
23
20.tar.xz

$ cd stm32mp1-openstlinux-4.
14
19-
rocko
thud-mp1-
18
19-
01
02-
23
20/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-
trusted-
stm32mp-
2017
2018.11-
release-AUTOINC+c253573f3e
r0/
$ tar xvf 
u-boot-trusted-stm32mp-2017
v2018.11
-release-AUTOINC+c253573f3e
.tar.gz

Release note

Details of the content of the U-Boot are available in the associated STM32MP15

ecosystem

If you are interested in previous releases, please refer to the archives of the ecosystem release note.

  • The U-Boot installation directory is in the <Developer Package installation directory>/stm32mp1-openstlinux-4.
14
  • 19-
rocko
  • thud-mp1-
18
  • 19-
01
  • 02-
23
  • 20/sources/arm-openstlinux_weston-linux-gnueabi directory, and is named u-boot-
trusted-
  • stm32mp-<U-Boot version>
-AUTOINC+<U-Boot SHA1>
  • :
u-boot-
trusted-
stm32mp-
2017
2018.11-
release-AUTOINC+c253573f3e
r0  
U-Boot installation directory
├── [*].patch              
ST patches to apply during the U-Boot preparation (see next chapter)
├── 
git
u-boot-2018.11         
U-Boot source code directory
├── Makefile.sdk           
Makefile for the U-Boot compilation
├── README.HOW_TO.txt      
Helper file for U-Boot management: reference for U-Boot build
├── series                 
List of all ST patches to apply
└── 
u-boot-trusted-stm32mp-2017
v2018.11
-release-AUTOINC+c253573f3e
.tar.gz        Tarball file of the U-Boot source code



<noinclude>
{{ArticleMainWriter | DenisH}}
{{ReviewersList | NathalieS, BernardP, RomualdJ, Jean-ChristopheT}}
{{ArticleApprovedVersion | DenisH | Jean-ChristopheT(Passed, 28Nov'18) | Jean-ChristopheT - 17Sep'18 | PhilipS - 25Jun'18 - 7989 | 05Dec'18}}

[[Category:Sub-articles]]
{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Make the following modifications in this copy:
** Change the "Download" span id to "Download <name of the old release>" (example: "Download Alpha1")
* Make the following modifications in the first chapter
** Change the name of the tarball file
** Change the download URLs
** Change the link to the release note
** Change the path and the description of the installation directory
}}
This article provides the following information:
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
* Where to find the associated release note* Where to find the previous releases (archives)

{{Warning|To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: [[:Category:Developer Package]]}}

==Beta1STM32MP15-Ecosystem-v1.2.0 release==</noinclude>

* The STM32MP1 U-Boot is delivered through a tarball file named 
**'''SOURCES-u-boot-{{Highlight|stm32mp1-boards-revb}}-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards {{Highlight|'''revision B'''}}
**'''SOURCES-u-boot-{{Highlight|stm32mp1-boards-revc}}-openstlinux-4.14-rocko-mp1-18-11-26en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards {{Highlight|'''revision C'''}}


<span id="Download"></span>

* Download and install the STM32MP1 U-Boot:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Limited_License_Agreement|Limited License Agreement]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partitions:|here]]''
{| class="wikitable"
|-
!  !! {{SoftwareLicenseAgreement | distribution=OpenSTLinux | chapter=Boot partition:}}
{| class="st-table"
|-
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - Beta1 release
|-
| Download || 
{{InternalInfo|
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-11-26/SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]<br>

OR<br>

[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-11-26/SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]
}}
{{STdotcomInfo|
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
* STM32MP15-Ecosystem-v1.2.0 release
|-
| Download || You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://mywww.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz content/ccc/resource/technical/sw-updater/firmware2/group0/dd/ed/ea/0d/ff/65/46/d1/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]<br>

OR<br>

[https://my.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/20-02-19.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz 20-02-19.tar.xz en.SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]
}}20-02-19.tar.xz]<br>
|-
| Installation ||
* Go to the host PC directory in which you want to install the Developer Package (''<Developer Package installation directory>''); if you follow the [[Example of directory structure for Packages|proposition to organize the working directory]], this means:
 $ cd <working directory path>/Developer-Package
* Download the tarball file in this directory
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):<pre>

$ tar xvf SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz
OR
$ tar xvf en.SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-2620-02-19.tar.xz

$ cd stm32mp1-boards-rev[b/c]-openstlinux-4.14-rocko-mp1-18-11-26/sources/arm-openstlinux_westonopenstlinux-20-02-19/sources/arm-ostl-linux-gnueabi/u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb811-r0/
$ tar xvf u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.v2018.11.tar.gz</pre>

|-
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystemOpenSTLinux release note - Beta1v1.2.0|STM32MP15 ecosystemOpenSTLinux release note]].
[[File:Archive_box.png|25px|link=]] If you are interested in previousolder releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release notehave a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
|}

* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-boards-rev[b/c]-openstlinux-4.14-rocko-mp1-18-11-26/sources/arm-openstlinux_westonopenstlinux-20-02-19/sources/arm-ostl-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':

 {{Green|u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8}}             11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
 ├── [*].patch                                                         {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 ├── {{Green|git}}                                                               u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
 ├── Makefile.sdk                                                      {{Highlight|Makefile for the U-Boot compilation}}
 ├── README.HOW_TO.txt                                                 {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                                                            {{Highlight|List of all ST patches to apply}}
 └── u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.tar.gz          v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}<noinclude>


==Archives==
{{InternalInfo|Please copy the content of the older release here when delivering a new release<pre>

===XXX release===<div class="NavFrame collapsed">
<div class="NavHead">Details</div>
<div class="NavContent">

  ...</div>
</div>
</pre>

}}

===Alpha2 release=== [[File:Archive_box.png|25px|link=]]==<div class="mw-collapsible mw-collapsed">

===STM32MP15-Ecosystem-v1.1.0 release===<div class="mw-collapsible-content">

* The STM32MP1 U-Boot is delivered through a tarball file named '''

**'''en.SOURCES-u-boot-openstlinux-4.14-rocko19-thud-mp1-18-07-0319-10-09.tar.xz'''.
 for STM32MP157C-EV1 and STM32MP157X-DKX boards 
<span id="Download"></span>
* Download and install the STM32MP1 U-Boot
:''By downloading the tarball filethis software package, you agree to be bound to the terms of the [[media:LLA_evaluation_for_STM32MPU.pdf|Limited License Agreement]]''
{| class="wikitable"
|-
!  !! OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="st-table"
|-
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - Alpha2 release
|-
| Download || <span id="Download Alpha2"></span>

{{InternalInfo|
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-07-03/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz]
}}
{{STdotcomInfo|
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
* STM32MP15-Ecosystem-v1.1.0 release
|-
| Download || You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://mywww.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz]
}}content/ccc/resource/technical/sw-updater/firmware2/group0/b7/f0/cc/85/b4/f0/49/97/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz]<br>
|-
| Installation ||
* Go to the host PC directory in which you want to install the Developer Package (''<Developer Package installation directory>''); if you follow the [[Example of directory structure for Packages|proposition to organize the working directory]], this means:
 $ cd <working directory path>/Developer-Package
* Download the tarball file in this directory
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):<pre>

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-07-0319-10-09.tar.xz
$ cd stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-07-0319-10-09/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e11-r0/
$ tar xvf u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.v2018.11.tar.gz</pre>

|-
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystemOpenSTLinux release note - Alpha2v1.1.0|STM32MP15 ecosystemOpenSTLinux release note]].
[[File:Archive_box.png|25px|link=]] If you are interested in previousolder releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release notehave a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
|}

* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-07-0319-10-09/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-trusted-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':

 {{Green|u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e}}             '':

 {{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
 ├── [*].patch                                                         {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 ├── {{Green|git}}                                                               u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
 ├── Makefile.sdk                                                      {{Highlight|Makefile for the U-Boot compilation}}
 ├── README.HOW_TO.txt                                                 {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                                                            {{Highlight|List of all ST patches to apply}}
 └── u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.tar.gz  v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}

===Alpha1 release===</div></div>

<div class="mw-collapsible mw-collapsed">

===STM32MP15-Ecosystem-v1.0.0 release===<div class="mw-collapsible-content">

* The STM32MP1 U-Boot is delivered through a tarball file named '''

**'''en.SOURCES-u-boot-openstlinux-4.14-rocko19-thud-mp1-18-01-2319-02-20.tar.xz'''.
 for STM32MP157C-EV1 and STM32MP157X-DKX boards 
<span id="Download"></span>
* Download and install the STM32MP1 U-Boot
:''By downloading the tarball filethis software package, you agree to be bound to the terms of the [[media:LLA_evaluation_for_STM32MPU.pdf|Limited License Agreement]]''
{| class="wikitable"
|-
!  !! OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="st-table"
|-
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - Alpha1 release
|-
| Download || <span id="Download Alpha1"></span>

{{InternalInfo|
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-01-23/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz]
}}
{{STdotcomInfo|
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
* STM32MP15-Ecosystem-v1.0.0 release
|-
| Download || You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://mywww.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz]
}}content/ccc/resource/technical/sw-updater/firmware2/group0/6c/b7/e5/68/0b/d5/49/13/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz]<br>
|-
| Installation ||
* Go to the host PC directory in which you want to install the Developer Package (''<Developer Package installation directory>''); if you follow the [[Example of directory structure for Packages|proposition to organize the working directory]], this means:
 $ cd <working directory path>/Developer-Package
* Download the tarball file in this directory
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):<pre>

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-01-2319-02-20.tar.xz
$ cd stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-01-2319-02-20/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-trusted-stm32mp-20172018.11-release-AUTOINC+c253573f3er0/
$ tar xvf u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3ev2018.11.tar.gz</pre>

|-
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystemOpenSTLinux release note - Alpha1v1.0.0|STM32MP15 ecosystemOpenSTLinux release note]].

If you are interested in previous releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release note.
||}

* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.14-rocko19-thud-mp1-18-01-2319-02-20/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-trusted-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':

 {{Green|u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e}}             '':

 {{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
 ├── [*].patch                                                         {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 ├── {{Green|git}}                                                               u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
 ├── Makefile.sdk                                                      {{Highlight|Makefile for the U-Boot compilation}}
 ├── README.HOW_TO.txt                                                 {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                                                            {{Highlight|List of all ST patches to apply}}
 └── u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e.tar.gz  {{Highlight|Tarball file of the U-Boot source code}}{{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                 {{Highlight|List of all ST patches to apply}}
 └── v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}</div></div>


[[Category:Sub-articles]]
{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Make the following modifications in this copy:
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
* Make the following modifications in the first chapter
** Change the name of the tarball file
** Change the download URLs
** Change the link to the release note
** Change the path and the description of the installation directory
}}
</noinclude>
(30 intermediate revisions by 6 users not shown)
Line 1: Line 1:
  +
 
<noinclude>
 
<noinclude>
{{ArticleMainWriter | DenisH}}
 
{{ReviewersList | NathalieS, BernardP, RomualdJ, Jean-ChristopheT}}
 
{{ArticleApprovedVersion | DenisH | Jean-ChristopheT(Passed, 28Nov'18) | Jean-ChristopheT - 17Sep'18 | PhilipS - 25Jun'18 - 7989 | 05Dec'18}}
 
 
[[Category:Sub-articles]]
 
{{UpdateNeededForNewRelease|
 
* Copy the current release (first chapter) in the "Archives" chapter
 
* Make the following modifications in this copy:
 
** Change the "Download" span id to "Download <name of the old release>" (example: "Download Alpha1")
 
* Make the following modifications in the first chapter
 
** Change the name of the tarball file
 
** Change the download URLs
 
** Change the link to the release note
 
** Change the path and the description of the installation directory
 
}}
 
 
 
This article provides the following information:
 
This article provides the following information:
 
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
 
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
 
* Where to find the associated release note
 
* Where to find the associated release note
* Where to find the previous releases (archives)
 
   
 
{{Warning|To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: [[:Category:Developer Package]]}}
 
{{Warning|To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: [[:Category:Developer Package]]}}
   
==Beta1 release==
+
==STM32MP15-Ecosystem-v1.2.0 release==
 
</noinclude>
 
</noinclude>
 
* The STM32MP1 U-Boot is delivered through a tarball file named  
 
* The STM32MP1 U-Boot is delivered through a tarball file named  
**'''SOURCES-u-boot-{{Highlight|stm32mp1-boards-revb}}-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards {{Highlight|'''revision B'''}}
+
**'''en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards  
**'''SOURCES-u-boot-{{Highlight|stm32mp1-boards-revc}}-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards {{Highlight|'''revision C'''}}
 
   
 
<span id="Download"></span>
 
<span id="Download"></span>
 
* Download and install the STM32MP1 U-Boot
 
* Download and install the STM32MP1 U-Boot
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Limited_License_Agreement|Limited License Agreement]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partitions:|here]]''
+
{{SoftwareLicenseAgreement | distribution=OpenSTLinux | chapter=Boot partition:}}
{| class="wikitable"
+
{| class="st-table"
 
|-
 
|-
!  !! STM32MP1 Developer Package U-Boot - Beta1 release
+
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.2.0 release
 
|-
 
|-
 
| Download ||  
 
| Download ||  
{{InternalInfo|
+
You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-11-26/SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]<br>
+
[https://www.st.com/content/ccc/resource/technical/sw-updater/firmware2/group0/dd/ed/ea/0d/ff/65/46/d1/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz]<br>
OR<br>
 
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-11-26/SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]
 
}}
 
{{STdotcomInfo|
 
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
 
* You need to be logged on to ''my.st.com'' before accessing the following link
 
[https://my.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]<br>
 
OR<br>
 
[https://my.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz]
 
}}
 
 
|-
 
|-
 
| Installation ||
 
| Installation ||
Line 56: Line 29:
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
<pre>
 
<pre>
$ tar xvf SOURCES-u-boot-stm32mp1-boards-revb-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz
+
$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-20-02-19.tar.xz
OR
 
$ tar xvf SOURCES-u-boot-stm32mp1-boards-revc-openstlinux-4.14-rocko-mp1-18-11-26.tar.xz
 
   
$ cd stm32mp1-boards-rev[b/c]-openstlinux-4.14-rocko-mp1-18-11-26/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8/
+
$ cd stm32mp1-openstlinux-20-02-19/sources/arm-ostl-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
$ tar xvf u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.tar.gz
+
$ tar xvf v2018.11.tar.gz
 
</pre>
 
</pre>
 
|-
 
|-
 
| Release note ||
 
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystem release note - Beta1|STM32MP15 ecosystem release note]].
+
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.2.0|STM32MP15 OpenSTLinux release note]].
   
If you are interested in previous releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release note.
+
[[File:Archive_box.png|25px|link=]] If you are interested in older releases, please have a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
 
|}
 
|}
   
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-boards-rev[b/c]-openstlinux-4.14-rocko-mp1-18-11-26/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':
+
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-20-02-19/sources/arm-ostl-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>'':
   
  {{Green|u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8}}             {{Highlight|'''U-Boot installation directory'''}}
+
  {{Green|u-boot-stm32mp-2018.11-r0}} {{Highlight|'''U-Boot installation directory'''}}
  ├── [*].patch                                                         {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
+
  ├── [*].patch             {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
  ├── {{Green|git}}                                                               {{Highlight|'''U-Boot source code directory'''}}
+
  ├── {{Green|u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
  ├── Makefile.sdk                                                     {{Highlight|Makefile for the U-Boot compilation}}
+
  ├── Makefile.sdk           {{Highlight|Makefile for the U-Boot compilation}}
  ├── README.HOW_TO.txt                                                 {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
+
  ├── README.HOW_TO.txt     {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
  ├── series                                                           {{Highlight|List of all ST patches to apply}}
+
  ├── series                 {{Highlight|List of all ST patches to apply}}
  └── u-boot-stm32mp-2018.09-release.AUTOINC+f88b6facb8.tar.gz         {{Highlight|Tarball file of the U-Boot source code}}
+
  └── v2018.11.tar.gz       {{Highlight|Tarball file of the U-Boot source code}}
 
<noinclude>
 
<noinclude>
   
==Archives==
+
==Archives [[File:Archive_box.png|25px|link=]]==
{{InternalInfo|Please copy the content of the older release here when delivering a new release
+
<div class="mw-collapsible mw-collapsed">
<pre>
+
===STM32MP15-Ecosystem-v1.1.0 release===
===XXX release===
+
<div class="mw-collapsible-content">
<div class="NavFrame collapsed">
 
  <div class="NavHead">Details</div>
 
  <div class="NavContent">
 
  ...
 
  </div>
 
</div>
 
</pre>
 
}}
 
   
===Alpha2 release===
+
* The STM32MP1 U-Boot is delivered through a tarball file named  
* The STM32MP1 U-Boot is delivered through a tarball file named '''SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz'''.
+
**'''en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-10-09.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards
   
  +
<span id="Download"></span>
 
* Download and install the STM32MP1 U-Boot
 
* Download and install the STM32MP1 U-Boot
:''By downloading the tarball file, you agree to be bound to the terms of the [[media:LLA_evaluation_for_STM32MPU.pdf|Limited License Agreement]]''
+
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
+
{| class="st-table"
 
|-
 
|-
!  !! STM32MP1 Developer Package U-Boot - Alpha2 release
+
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.1.0 release
 
|-
 
|-
| Download || <span id="Download Alpha2"></span>
+
| Download ||  
{{InternalInfo|
+
You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-07-03/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz]
+
[https://www.st.com/content/ccc/resource/technical/sw-updater/firmware2/group0/b7/f0/cc/85/b4/f0/49/97/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz]<br>
}}
 
{{STdotcomInfo|
 
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
 
* You need to be logged on to ''my.st.com'' before accessing the following link
 
[https://my.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz]
 
}}
 
 
|-
 
|-
 
| Installation ||
 
| Installation ||
Line 119: Line 77:
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
<pre>
 
<pre>
$ tar xvf SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-07-03.tar.xz
+
$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz
$ cd openstlinux-4.14-rocko-mp1-18-07-03/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e/
+
 
$ tar xvf u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.tar.gz
+
$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
  +
$ tar xvf v2018.11.tar.gz
 
</pre>
 
</pre>
 
|-
 
|-
 
| Release note ||
 
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystem release note - Alpha2|STM32MP15 ecosystem release note]].
+
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.1.0|STM32MP15 OpenSTLinux release note]].
   
If you are interested in previous releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release note.
+
[[File:Archive_box.png|25px|link=]] If you are interested in older releases, please have a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
 
|}
 
|}
   
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/openstlinux-4.14-rocko-mp1-18-07-03/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-trusted-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':
+
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>'':
  +
 
  +
{{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
  +
├── [*].patch              {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
  +
├── {{Green|u-boot-2018.11}}        {{Highlight|'''U-Boot source code directory'''}}
  +
├── Makefile.sdk          {{Highlight|Makefile for the U-Boot compilation}}
  +
├── README.HOW_TO.txt      {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
  +
├── series                {{Highlight|List of all ST patches to apply}}
  +
└── v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}
  +
</div></div>
   
{{Green|u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e}}            {{Highlight|'''U-Boot installation directory'''}}
+
<div class="mw-collapsible mw-collapsed">
├── [*].patch                                                        {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
+
===STM32MP15-Ecosystem-v1.0.0 release===
├── {{Green|git}}                                                              {{Highlight|'''U-Boot source code directory'''}}
+
<div class="mw-collapsible-content">
├── Makefile.sdk                                                      {{Highlight|Makefile for the U-Boot compilation}}
 
├── README.HOW_TO.txt                                                {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 
├── series                                                            {{Highlight|List of all ST patches to apply}}
 
└── u-boot-trusted-stm32mp-2018.03-release.AUTOINC+f95ab1fb6e.tar.gz  {{Highlight|Tarball file of the U-Boot source code}}
 
   
===Alpha1 release===
+
* The STM32MP1 U-Boot is delivered through a tarball file named  
* The STM32MP1 U-Boot is delivered through a tarball file named '''SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz'''.
+
**'''en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-02-20.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards
   
  +
<span id="Download"></span>
 
* Download and install the STM32MP1 U-Boot
 
* Download and install the STM32MP1 U-Boot
:''By downloading the tarball file, you agree to be bound to the terms of the [[media:LLA_evaluation_for_STM32MPU.pdf|Limited License Agreement]]''
+
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
+
{| class="st-table"
 
|-
 
|-
!  !! STM32MP1 Developer Package U-Boot - Alpha1 release
+
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.0.0 release
 
|-
 
|-
| Download || <span id="Download Alpha1"></span>
+
| Download ||  
{{InternalInfo|
+
You need to be logged on to ''my.st.com'' before accessing the following link <br>
[https://citools.st.com/artifacts/artifactory/MPUPUBDV-codex-st-com/openstlinux-4.14-rocko-mp1-18-01-23/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz]
+
[https://www.st.com/content/ccc/resource/technical/sw-updater/firmware2/group0/6c/b7/e5/68/0b/d5/49/13/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz]<br>
}}
 
{{STdotcomInfo|
 
* '''A ''my.st.com'' account is required, with specific access rights: please request these rights from your ST support contact'''
 
* You need to be logged on to ''my.st.com'' before accessing the following link
 
[https://my.st.com/collab/g1/stm32mp1/openstlinux_library/REF%20code/SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz]
 
}}
 
 
|-
 
|-
 
| Installation ||
 
| Installation ||
Line 165: Line 124:
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):
 
<pre>
 
<pre>
$ tar xvf SOURCES-u-boot-openstlinux-4.14-rocko-mp1-18-01-23.tar.xz
+
$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz
$ cd openstlinux-4.14-rocko-mp1-18-01-23/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e/
+
 
$ tar xvf u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e.tar.gz
+
$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
  +
$ tar xvf v2018.11.tar.gz
 
</pre>
 
</pre>
 
|-
 
|-
 
| Release note ||
 
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 ecosystem release note - Alpha1|STM32MP15 ecosystem release note]].
+
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.0.0|STM32MP15 OpenSTLinux release note]].
  +
|}
  +
 
  +
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>'':
   
If you are interested in previous releases, please refer to the [[STM32MP15 ecosystem release note#Archives| archives]] of the ecosystem release note.
+
{{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
|}
+
├── [*].patch              {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
  +
├── {{Green|u-boot-2018.11}}        {{Highlight|'''U-Boot source code directory'''}}
  +
├── Makefile.sdk          {{Highlight|Makefile for the U-Boot compilation}}
  +
├── README.HOW_TO.txt      {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
  +
├── series                {{Highlight|List of all ST patches to apply}}
  +
└── v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}
  +
</div></div>
   
* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/openstlinux-4.14-rocko-mp1-18-01-23/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-trusted-stm32mp-&#60;U-Boot version>-AUTOINC+&#60;U-Boot SHA1>'':
+
[[Category:Sub-articles]]
  +
{{UpdateNeededForNewRelease|
  +
* Copy the current release (first chapter) in the "Archives" chapter
  +
* Make the following modifications in this copy:
  +
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
  +
* Make the following modifications in the first chapter
  +
** Change the name of the tarball file
  +
** Change the download URLs
  +
** Change the link to the release note
  +
** Change the path and the description of the installation directory
  +
}}
   
{{Green|u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e}}            {{Highlight|'''U-Boot installation directory'''}}
 
├── [*].patch                                                        {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 
├── {{Green|git}}                                                              {{Highlight|'''U-Boot source code directory'''}}
 
├── Makefile.sdk                                                      {{Highlight|Makefile for the U-Boot compilation}}
 
├── README.HOW_TO.txt                                                {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 
├── series                                                            {{Highlight|List of all ST patches to apply}}
 
└── u-boot-trusted-stm32mp-2017.11-release-AUTOINC+c253573f3e.tar.gz  {{Highlight|Tarball file of the U-Boot source code}}
 
 
</noinclude>
 
</noinclude>

Attachments

Discussions