Difference between revisions of "STM32MP1 Developer Package - U-Boot"

[quality revision] [quality revision]

This article provides the following information:

  • How to download and install the latest U-Boot for the STM32 microprocessor Series used
  • Where to find the associated release note
Warning.png To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: Category:Developer Package

1 STM32MP15-Ecosystem-v1.1.0 release[edit]

  • The STM32MP1 U-Boot is delivered through a tarball file named
    • en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-10-09.tar.xz for STM32MP157C-EV1 and STM32MP157X-DKX boards

  • Download and install the STM32MP1 U-Boot
By downloading this software package, you agree to be bound to the terms of the software license agreement (SLA). The detailed content licenses can be found here
STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.1.0 release
Download

You need to be logged on to my.st.com before accessing the following link
en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz

Installation
$ cd <working directory path>/Developer-Package

  • Download the tarball file in this directory
  • Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz

$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
$ tar xvf v2018.11.tar.gz

Release note

Details of the content of the U-Boot are available in the associated STM32MP15 OpenSTLinux release note.

Archive box.png If you are interested in older releases, please have a look into the section Archives.

  • The U-Boot installation directory is in the <Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi directory, and is named u-boot-stm32mp-<U-Boot version>:
u-boot-stm32mp-2018.11-r0  U-Boot installation directory
├── [*].patch              ST patches to apply during the U-Boot preparation (see next chapter)
├── u-boot-2018.11         U-Boot source code directory
├── Makefile.sdk           Makefile for the U-Boot compilation
├── README.HOW_TO.txt      Helper file for U-Boot management: reference for U-Boot build
├── series                 List of all ST patches to apply
└── v2018.11.tar.gz        Tarball file of the U-Boot source code


2 Archives Archive box.png[edit]

2.1 STM32MP15-Ecosystem-v1.0.0 release[edit]

  • The STM32MP1 U-Boot is delivered through a tarball file named
    • en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-02-20.tar.xz for STM32MP157C-EV1 and STM32MP157X-DKX boards

  • Download and install the STM32MP1 U-Boot
By downloading this software package, you agree to be bound to the terms of the software license agreement (SLA). The detailed content licenses can be found here
STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.0.0 release
Download

You need to be logged on to my.st.com before accessing the following link
en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz

Installation
$ cd <working directory path>/Developer-Package

  • Download the tarball file in this directory
  • Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz

$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
$ tar xvf v2018.11.tar.gz

Release note

Details of the content of the U-Boot are available in the associated STM32MP15 OpenSTLinux release note.

  • The U-Boot installation directory is in the <Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi directory, and is named u-boot-stm32mp-<U-Boot version>:
u-boot-stm32mp-2018.11-r0  U-Boot installation directory
├── [*].patch              ST patches to apply during the U-Boot preparation (see next chapter)
├── u-boot-2018.11         U-Boot source code directory
├── Makefile.sdk           Makefile for the U-Boot compilation
├── README.HOW_TO.txt      Helper file for U-Boot management: reference for U-Boot build
├── series                 List of all ST patches to apply
└── v2018.11.tar.gz        Tarball file of the U-Boot source code


<noinclude>
{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Make the following modifications in this copy:
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
* Make the following modifications in the first chapter
** Change the name of the tarball file
** Change the download URLs
** Change the link to the release note
** Change the path and the description of the installation directory
}}
This article provides the following information:
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
* Where to find the associated release note

{{Warning|To use this package efficiently, please read the Developer Package article relative to your STM32 microprocessors Series: [[:Category:Developer Package]]}}

==STM32MP15-Ecosystem-v1.1.0 release==</noinclude>

* The STM32MP1 U-Boot is delivered through a tarball file named 
**'''en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-10-09.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards 
<span id="Download"></span>

* Download and install the STM32MP1 U-Boot
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
|-
!  !! st-table"
|-
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.1.0 release
|-
| Download || 
You need to be logged on to ''my.st.com'' before accessing the following link <br>

[https://www.st.com/content/ccc/resource/technical/sw-updater/firmware2/group0/b7/f0/cc/85/b4/f0/49/97/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz]<br>

|-
| Installation ||
* Go to the host PC directory in which you want to install the Developer Package (''<Developer Package installation directory>''); if you follow the [[Example of directory structure for Packages|proposition to organize the working directory]], this means:
 $ cd <working directory path>/Developer-Package
* Download the tarball file in this directory
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):<pre>

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-10-09.tar.xz

$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
$ tar xvf v2018.11.tar.gz</pre>

|-
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.1.0|STM32MP15 OpenSTLinux release note]].
[[File:Archive_box.png|25px|link=]] If you are interested in older releases, please have a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
|}

* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-10-09/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>'':

 {{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
 ├── [*].patch              {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 ├── {{Green|u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
 ├── Makefile.sdk           {{Highlight|Makefile for the U-Boot compilation}}
 ├── README.HOW_TO.txt      {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                 {{Highlight|List of all ST patches to apply}}
 └── v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}<noinclude>


==Archives== [[File:Archive_box.png|25px|link=]]==
<div class="mw-collapsible mw-collapsed">

===STM32MP15-Ecosystem-v1.0.0 release===<div class="mw-collapsible-content">


* The STM32MP1 U-Boot is delivered through a tarball file named 
**'''en.SOURCES-u-boot-openstlinux-4.19-thud-mp1-19-02-20.tar.xz''' for STM32MP157C-EV1 and STM32MP157X-DKX boards 
<span id="Download"></span>

* Download and install the STM32MP1 U-Boot
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
|-
!  !! st-table"
|-
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.0.0 release
|-
| Download || 
You need to be logged on to ''my.st.com'' before accessing the following link <br>

[https://www.st.com/content/ccc/resource/technical/sw-updater/firmware2/group0/6c/b7/e5/68/0b/d5/49/13/stm32cube_Standard_A7_BSP_components_u-boot/files/SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz/jcr:content/translations/en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz]<br>

|-
| Installation ||
* Go to the host PC directory in which you want to install the Developer Package (''<Developer Package installation directory>''); if you follow the [[Example of directory structure for Packages|proposition to organize the working directory]], this means:
 $ cd <working directory path>/Developer-Package
* Download the tarball file in this directory
* Uncompress the tarball file to get the U-Boot (U-Boot source code, ST patches and so on):<pre>

$ tar xvf en.SOURCES-u-boot-stm32mp1-openstlinux-4.19-thud-mp1-19-02-20.tar.xz

$ cd stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi/u-boot-stm32mp-2018.11-r0/
$ tar xvf v2018.11.tar.gz</pre>

|-
| Release note ||
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.0.0|STM32MP15 OpenSTLinux release note]].
|}

* The '''U-Boot installation directory''' is in the ''<Developer Package installation directory>/stm32mp1-openstlinux-4.19-thud-mp1-19-02-20/sources/arm-openstlinux_weston-linux-gnueabi'' directory, and is named ''u-boot-stm32mp-&#60;U-Boot version>'':

 {{Green|u-boot-stm32mp-2018.11-r0}}  {{Highlight|'''U-Boot installation directory'''}}
 ├── [*].patch              {{Highlight|ST patches to apply during the U-Boot preparation (see next chapter)}}
 ├── {{Green|u-boot-2018.11}}         {{Highlight|'''U-Boot source code directory'''}}
 ├── Makefile.sdk           {{Highlight|Makefile for the U-Boot compilation}}
 ├── README.HOW_TO.txt      {{Highlight|Helper file for U-Boot management: '''reference''' for U-Boot build}}
 ├── series                 {{Highlight|List of all ST patches to apply}}
 └── v2018.11.tar.gz        {{Highlight|Tarball file of the U-Boot source code}}</div></div>


[[Category:Sub-articles]]{{UpdateNeededForNewRelease|
* Copy the current release (first chapter) in the "Archives" chapter
* Make the following modifications in this copy:
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
* Make the following modifications in the first chapter
** Change the name of the tarball file
** Change the download URLs
** Change the link to the release note
** Change the path and the description of the installation directory
}}
</noinclude>
Line 1: Line 1:
 
<noinclude>
 
<noinclude>
{{UpdateNeededForNewRelease|
 
* Copy the current release (first chapter) in the "Archives" chapter
 
* Make the following modifications in this copy:
 
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
 
* Make the following modifications in the first chapter
 
** Change the name of the tarball file
 
** Change the download URLs
 
** Change the link to the release note
 
** Change the path and the description of the installation directory
 
}}
 
 
 
This article provides the following information:
 
This article provides the following information:
 
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
 
* How to download and install the '''latest''' U-Boot for the STM32 microprocessor Series used
Line 25: Line 14:
 
* Download and install the STM32MP1 U-Boot
 
* Download and install the STM32MP1 U-Boot
 
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
 
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
+
{| class="st-table"
 
|-
 
|-
!  !! STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.1.0 release
+
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.1.0 release
 
|-
 
|-
 
| Download ||  
 
| Download ||  
Line 48: Line 37:
 
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.1.0|STM32MP15 OpenSTLinux release note]].
 
Details of the content of the U-Boot are available in the '''associated''' [[STM32MP15 OpenSTLinux release note - v1.1.0|STM32MP15 OpenSTLinux release note]].
   
If you are interested in older releases, please have a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
+
[[File:Archive_box.png|25px|link=]] If you are interested in older releases, please have a look into the section [[STM32MP1_Developer_Package_-_U-Boot#Archives|Archives]].
 
|}
 
|}
   
Line 62: Line 51:
 
<noinclude>
 
<noinclude>
   
==Archives==
+
==Archives [[File:Archive_box.png|25px|link=]]==
 
<div class="mw-collapsible mw-collapsed">
 
<div class="mw-collapsible mw-collapsed">
 
===STM32MP15-Ecosystem-v1.0.0 release===
 
===STM32MP15-Ecosystem-v1.0.0 release===
Line 73: Line 62:
 
* Download and install the STM32MP1 U-Boot
 
* Download and install the STM32MP1 U-Boot
 
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
 
:''By downloading this software package, you agree to be bound to the terms of the [[OpenSTLinux licenses#Top Software license agreement (SLA) and third-party licences|software license agreement (SLA)]]''. ''The detailed content licenses can be found [[OpenSTLinux licenses#Boot_partition:|here]]''
{| class="wikitable"
+
{| class="st-table"
 
|-
 
|-
!  !! STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.0.0 release
+
!  !! style="text-align:center;" |STM32MP1 Developer Package U-Boot - STM32MP15-Ecosystem-v1.0.0 release
 
|-
 
|-
 
| Download ||  
 
| Download ||  
Line 109: Line 98:
   
 
[[Category:Sub-articles]]
 
[[Category:Sub-articles]]
  +
{{UpdateNeededForNewRelease|
  +
* Copy the current release (first chapter) in the "Archives" chapter
  +
* Make the following modifications in this copy:
  +
** Change the "Download" span id to "Download <name of the old release>" (example: "Download STM32MP15-Ecosystem-v1.0.0 release")
  +
* Make the following modifications in the first chapter
  +
** Change the name of the tarball file
  +
** Change the download URLs
  +
** Change the link to the release note
  +
** Change the path and the description of the installation directory
  +
}}
  +
 
</noinclude>
 
</noinclude>