Difference between revisions of "Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Unpack the STM32MP157C-DK2 board"

[quality revision] [quality revision]
m
m
 
STM32MP157X-DK2.png
Let's start Develop on Arm® Cortex®-A7
Step category in.png Unpack the board Step.png Populate the target and boot the image Step.png Execute basic commands Step.png Use the demo launcher Step category out.png


1 Overview[edit]

This first stage explains the way to unpack the STM32MP157C-DK2 Discovery kit and the additional equipment you need.
The following block diagram provides high level information about how to connect them together.

STM32MP1 connection block diagram

2 Out of the box[edit]

STM32MP157C-DK2 recto
STM32MP157C-DK2 verso

3 Equipment[edit]

The following table lists the required equipment to start playing with your STM32MP157C-DK2 board.
Some of them are delivered with the STM32MP157C-DK2 Discovery kit. The other need to be purchased separately.

STM32MP157C-DK2 Discovery kit Flexible development platform for the STM32MP15 microprocessor device Delivered
MicroSD card To be populated with the OpenSTLinux Distribution (Linux software),
and providing extra storage capacity.
A 2-Gbyte minimum microSD card is needed
Delivered
USB Type-C™ to USB Type-C™ cable Used to connect the STM32MP157C-DK2 Discovery kit to the power supply Delivered
Micro USB Type-B to USB Type-A cable Used to connect the STM32MP157C-DK2 Discovery kit to the PC
through the USB micro-B (ST-LINK/V2-1)
Not delivered
USB Type-C™ to USB Type-A cable Used to connect the STM32MP157C-DK2 Discovery kit to an USB OTG device. Not delivered
Power Supply 5V/3A The power supply should be able to output 5V / 3A (15W) Not delivered
Laptop Assume a Linux PC running Ubuntu 16.04 Not delivered
Ethernet cable (optional) Used to connect the STM32MP157C-DK2 Discovery kit through ssh Not delivered

4 Connection[edit]

  • Connect the micro USB Type-B to USB Type-A cable between your laptop and the ST-LINK/V2-1 port of the board
  • Connect the USB Type-C™ to USB Type-C™ cable to the 5V/3A power supply
  • Connect the USB Type-C™ to USB Type-A cable betweenn your laptop and the USB Type-C™ OTG port of the board
  • Optionally connect the Ethernet cable between your Ethernet network and the Ethernet port of the board
STM32MP157C-DK2 Discovery kit connection
(LCD display has been removed in this view to better see the connectors)



Back button.png Overview button.png Next button.png


<bookshelf src="Book:Getting started" />
<noinclude>

{{ArticleMainWriter | VincentA}}
{{DISPLAYTITLE:{{SUBPAGENAME}}}}
__NOTOC__
[[Category:STM32MP157C-DK2 - let's start | 01]]</noinclude>


{| {| class="contenttable" style="margin: auto"
| colspan="9" style="text-align:center; border-color: white; background-color: white" | [[Image:STM32MP157X-DK2.png‎ | 80px | link=]]
|-
| colspan="4" style="text-align:left; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start | {{GSModuleCurrent|Let's start}}]]
| colspan="5" style="text-align:right; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Develop on Arm® Cortex®-A7 | {{GSModuleNext|Develop on Arm® Cortex®-A7}}]]
|-
| style="border-color: white; background-color: white" | [[Image:step_category_in.png|link=]]
| style="width:110px; text-align:center; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Unpack the STM32MP157C-DK2 board |  {{GSStepCurrent|Unpack the board}}]]
| style="border-color: white; background-color: white" | [[Image:step.png|link=]]
| style="width:110px; margin-top:0px; text-align:center; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Populate the target and boot the image | {{GSStepNext|Populate the target and boot the image}}]]
| style="border-color: white; background-color: white" | [[Image:step.png|link=]]
| style="width:110px; text-align:center; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Execute basic commands | {{GSStepNext|Execute basic commands}}]]
| style="border-color: white; background-color: white" | [[Image:step.png|link=]]
| style="width:110px; text-align:center; border-color: white; background-color: white" | [[Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Use the demo launcher | {{GSStepNext|Use the demo launcher}}]]
| style="border-color: white; background-color: white" | [[Image:step_category_out.png|link=]]
|}<br>

==Overview==
This first stage explains the way to unpack the STM32MP157C-DK2 Discovery kit and the additional equipment you need.<br>

The following block diagram provides high level information about how to connect them together.<br>

[[File: STM32MP1_connection_block_diagram.png|frame|center|link=|STM32MP1 connection block diagram]]

==Out of the box==

[[File: STM32MP157C-DK2_angle2.jpg|thumb|upright=2|center|link=|STM32MP157C-DK2 recto]]
[[File: STM32MP157C-DK2_verso.jpg|thumb|upright=2|center|link=|STM32MP157C-DK2 verso]]

==Equipment==
The following table lists the required equipment to start playing with your STM32MP157C-DK2 board.<br>

Some of them are delivered with the STM32MP157C-DK2 Discovery kit. The other need to be purchased separately.

{| class="st_table"
| STM32MP157C-DK2 Discovery kit
| Flexible development platform for the STM32MP15 microprocessor device
| Delivered 
|-
| MicroSD card
| To be populated with the OpenSTLinux Distribution (Linux software),<br>and providing extra storage capacity.<br> A 2-Gbyte minimum microSD card is needed
| Delivered 
|-
| USB Type-C™  to USB Type-C™ cable
| Used to connect  the STM32MP157C-DK2 Discovery kit to the power supply
| Delivered
|-
| Micro USB Type-B to USB Type-A cable
| Used to connect the STM32MP157C-DK2 Discovery kit to the PC<br>through the USB micro-B (ST-LINK/V2-1) 
| Not delivered
|-
| USB Type-C™ to USB Type-A cable
| Used to connect  the STM32MP157C-DK2 Discovery kit to an USB OTG device.
| Not delivered
|-
| Power Supply 5V/3A
| The power supply should be able to output 5V / 3A (15W)
| Not delivered
|-
| Laptop
| Assume a Linux PC running Ubuntu 16.04
| Not delivered
|-
| Ethernet cable (optional)
| Used to connect the STM32MP157C-DK2 Discovery kit through ssh
| Not delivered
|}
{{InternalInfo| For a list of USB Type-C supplies, see [[Contributors:TypeC_USB_supply_for_STM32M157C-DK2]] }}==Connection==
* Connect the micro USB Type-B to USB Type-A cable between your laptop and the ST-LINK/V2-1 port of the board
* Connect the USB Type-C™  to USB Type-C™ cable to the 5V/3A power supply
* Connect the USB Type-C™ to USB Type-A cable  betweenn your laptop and the USB Type-C™ OTG port of the board
* Optionally connect the Ethernet cable between your Ethernet network and the Ethernet port of the board
[[File: STM32MP157C-DK2_with_power_stlink_flasher_ethernet.png|thumb|upright=2|center|link=|STM32MP157C-DK2 Discovery kit connection <br>(LCD display has been removed in this view to better see the connectors)]]<br clear=all>

<br>

{| class="contenttable" style="margin: auto"
| style="border-color: white; background-color: white; width:120px; text-align:left" | [[Image:back_button.png|link=Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start]]
| style="border-color: white; background-color: white; width:360px; text-align:center" | [[Image:overview_button.png|link=Getting started/STM32MP1 boards/STM32MP157C-DK2]]
| style="border-color: white; background-color: white; width:120px; text-align:right" | [[Image:next_button.png|link=Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Populate the target and boot the image]]
|}

<noinclude>

{{DISPLAYTITLE:{{SUBPAGENAME}}}}
__NOTOC__
[[Category:STM32MP157C-DK2 - let's start | 01]]
{{PublicationRequestId | Auto}}</noinclude>
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
<bookshelf src="Book:Getting started" />
 
<bookshelf src="Book:Getting started" />
<noinclude>
 
{{ArticleMainWriter | VincentA}}
 
{{DISPLAYTITLE:{{SUBPAGENAME}}}}
 
__NOTOC__
 
[[Category:STM32MP157C-DK2 - let's start | 01]]
 
</noinclude>
 
 
 
{| class="contenttable" style="margin: auto"
 
{| class="contenttable" style="margin: auto"
 
| colspan="9" style="text-align:center; border-color: white; background-color: white" | [[Image:STM32MP157X-DK2.png‎ | 80px | link=]]
 
| colspan="9" style="text-align:center; border-color: white; background-color: white" | [[Image:STM32MP157X-DK2.png‎ | 80px | link=]]
Line 71: Line 64:
 
| Not delivered
 
| Not delivered
 
|}
 
|}
 
+
{{InternalInfo| For a list of USB Type-C supplies, see [[Contributors:TypeC_USB_supply_for_STM32M157C-DK2]] }}
 
==Connection==
 
==Connection==
 
* Connect the micro USB Type-B to USB Type-A cable between your laptop and the ST-LINK/V2-1 port of the board
 
* Connect the micro USB Type-B to USB Type-A cable between your laptop and the ST-LINK/V2-1 port of the board
Line 86: Line 79:
 
| style="border-color: white; background-color: white; width:120px; text-align:right" | [[Image:next_button.png|link=Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Populate the target and boot the image]]
 
| style="border-color: white; background-color: white; width:120px; text-align:right" | [[Image:next_button.png|link=Getting started/STM32MP1 boards/STM32MP157C-DK2/Let's start/Populate the target and boot the image]]
 
|}
 
|}
  +
  +
<noinclude>
  +
{{DISPLAYTITLE:{{SUBPAGENAME}}}}
  +
__NOTOC__
  +
[[Category:STM32MP157C-DK2 - let's start | 01]]
  +
{{PublicationRequestId | Auto}}
  +
</noinclude>

Attachments

Discussions